pickup tube

pickup tube

[′pik‚əp ‚tüb]
(electronics)
References in periodicals archive ?
Tenders are invited for Supply Of Foam Making Branch (Fb5x) With Pickup Tube As Per Is 2097-2012 For A&N Fire Service
BloApco's installation process involves the placement of the trim cutter and pickup tube relatively close to the converting machine (within 10-15 feet), connecting of ductwork from the converting machine, trim cutter and trim handling fan to the collection device (material separator, cyclone or drop-out box).
This is to accommodate a small air pickup tube that mounts directly to the baffle, while the other end of the line connects to the battery box.
If the old oil is really awful, you might want to remove the oil pan, scoop out all of the goop, and clean the pickup tube and any screens.
0525032) includes a flexible paint pickup tube so you can spray at any angle, a two-speed pump, and an adapter and hose so you can spray from a paint can instead of the attached paint container.
Similarly, when installing a re-circulating conditioning and filtration system, the pickup tube into the tank is optimised when near the bottom (not using the fuel system's draw, which is several inches higher to avoid the very substances you wish to collect).
The wet sandblasting kit included with these units consists of a flexible 15-foot sand pickup tube, sand point and a special venturi head, which creates a uniform blast pattern and increases the sand velocity.
The clean liquid phase--separated from the solid phase in the high-speed drum--is picked up by a pickup tube and transported to either a clear water buffer tank or directly to drain.
Some fleets spec side-mounted tanks mounted on a slight angle away from the fuel pickup tube so that any collected water will collect at the low point.
Standard equipment includes remote programmable controller with security to inhibit tampering, stainless-steel adjustable pick-up tube, heavy-duty grounded vinyl hose, low-level hopper alarm, remote shutoff to prevent loading while pickup tube is out of material, high-temperature shutoff valve, stainless-steel hose clamps, and rugged construction of 0.100-in.
The pickup tube used a taper that allowed the quick exchange of different sizes of blunt-end syringe needle pickup tips.
Another danger can be the accumulation of primer dust in either the pickup tube or the feed tube.