Tenders are invited for Adjustable Pipe Die
Set Bsc Size: 3/4 Inch, 1 Inch With 2 Set Die Gutka, Thread Pitch-16Tpi, Thread To Suit - As Per Bs:31, Construction - Die Set Should Be Robust For Industrial Use, Make: M/S Inder Or Equivalent
Through intensive testing, we have gathered experience with PE-Xa, which we have subsequently incorporated in the creation of our specialised extruder and pipe die
for PE-Xa processing.
The internal cooling device can be supplied as part of a new pipe die
or can be retrofitted into an existing die if internal space allows.
The gain in efficiency is achieved with a combination of a high-speed extruder with a newly developed pipe die
, a highly-efficient pipe cooling section, and a heat-recovery system.
The six extruder zones were set at 204/232/227/221/218/215[degrees]C while all the zones on the pipe die
were set at 215[degrees]C for the production of the specimen pipes.
The designer of the exhaust pipe die
started out by drawing lines to represent the die's shape but because there were so many curved surfaces, it was impossible to define with a wireframe alone.
Tenders are invited for Pipe Die
Set- Rachat Type- Size 1/2 Inch Dia To 1 Inch Dia.
Through the use of a pipe die
with efficient air cooling (EAC), a 25 to 30% reduction of the cooling section can be achieved.
The use of a sheet die instead of a pipe die
eliminates additional problems of differential cooling on the two sides of the extrudate, which gives rise to significant hoop stresses.
Tenders are invited for Open Well Submersible Pump, Capacity, 30 Hp, Pipe Die
Section: 100Mm, Head Range: 57/33 Mtrs, Discharge Range: 1100/2200 Lpm, Power Supply: 3 Phase, Make: Crompton Greaves, Kirloskar, Oswal.
Also supplies pipe die
heads for PVC and other thermoplastics (up to 800 mm OD) and complete systems for PVC windows, other profiles, and tubing.
The new Maxflexx pipe die
from Inoex GmbH in Germany (U.