pipe tee

pipe tee

[′pīp ‚tē]
(design engineering)
A T-shaped pipe fitting with two outlets, one at 90° to the connection to the main line.

pipe tee

A T-shaped pipe fitting with two outlets, one at 90° to the connection to the main line.
References in periodicals archive ?
Blind tees--a standard pipe tee with one outlet capped--acts like a pocket-type elbow; incoming pellets hit those built up in the capped outlet (see below).
An RTD sensor built into the flowmeter measures temperature at the meter, and the remote temperature is measured by means of a precision RTD sensor mounted in a pipe tee.
Connect a two-inch-long brass pipe nipple to a female pipe tee of the same diameter (one-eighth of an inch works well).
with 1/4" NPT 1/2"-27 9C 4720-00-066-4759 NS taper double male adapter) Pipe Nipple 1/4" X 6" 9C 4730-00-196-1541 Pipe Nipple 1/4" X 3" (2) ea 9C 4730-00-196-1487 Pipe Tee 1/4" (2) ea 9C 4730-00-263-5264 Regulator Low Pressure Air (With 9C 4820-01-250-8597 0-200 PSIG Gage) Relief Valve Low Pressure Air 9C 4820-00-454-7586 Pump 9C 4930-01-223-3730 Quick-disconnect type fittings, (Male) 9C 4730-00-766-9028 service air (Female) 9C 4730-00-766-9029 Pressure Gage, 0-200 PSIG 9C 6685-00-868-7918
We spent the best part of the day troubleshooting the heaters and brainstorming when we discovered that an improvised faucet, made from a pipe tee and two gate valves, had been installed outside for filling mop buckets.
A pipe tee serves as a declination housing and another 3-inch nipple as the declination shaft, whose upper end is connected through a flange to the telescope cradle.
engineer inserts a component such as a pipe tee or a ball
An RTD sensor built into the flowmeter measures temperature at the meter and the remote temperature is measured by means of a precision RTD sensor mounted in a pipe tee.
with 1/4" NPT 1/2"-27 NS taper double male adapter) 9C 4720-00-066-4759 Pipe Nipple 1/4" X 6" 9C 4730-00-196-1541 Pipe Nipple 1/4" X 3" (2) ea 9C 4730-00-196-1487 Pipe Tee 1/4" (2) ea 9C 4730-00-263-5264 Regulator Low Pressure Air (With 0-200 PSIG Gage) 9C 4820-01-250-8597 Relief Valve Low Pressure Air 9C 4820-00-454-7586 Pump 9C 4930-01-223-3730 Quick-disconnect type (Male) 9C 4730-00-766- (Female) 9C fittings, service air 9028 4730-00-766-9029
S Pipe Tee Set Fitted With Mating Weld-Able/ Threaded Flange Fitted With Gasket, Bolt And Nuts, Size 100 X 100 X 100Mm Nb Type: Flanged, Make: Tata, Jindal Or Any Isi Brand.