plastic conduit


Also found in: Acronyms.

plastic conduit

Plastic conduit or tubing used to enclose electric wiring.
References in periodicals archive ?
beginning in 1978, sought to have plastic conduit approved by the
The plastic conduit tends to lean in toward the beds where it's inserted into the soil, because of the forces against it.
The plastic conduits have a pre-molded slit, allowing them to snap over the wire.
Suppose that plastic conduit has just been invented and that the preplastic-conduit market was one in which all producers of metal conduit in the market were the M producers in figure 1 (i.
Tenders are invited for 330 lf of 2" pvc plastic conduit bored.
Plastic conduit is less expensive, lighter and much easier to work with.
Directionally drilled bore holes, lined with plastic conduit in which cable is placed, bypasses the sea-to-shore interface and high-energy surf zones which pose the greatest hazards to cable during a shore landing.
Underground cables must be armoured, or buried at least 20in deep and run through a tough plastic conduit.
MultiScanner(R) i700 OneStep(TM) has three modes to quickly handle every scanning need including: 1) Stud Mode to find wood or metal studs or joists; 2) Metal Mode to search exclusively for metal pipes or wire; and 3) AC Scan Mode to map out the sub-surface location of hot electrical wires even when they're encased in plastic conduit.
work includes 200 sy of 4" concrete sidewalk; 925 lf of 2" pvc sch 40 plastic conduit trenched; 500 lf of 3" pvc sch 40 plastic conduit trenched; 1,000 lf of 2" hdpe pipe bored; 1,000 lf of 3" hdpe pipe bored; 1 ls of video detection system; pavement markings.
Rosput explains, "Late last year we formed a subsidiary, AGL Networks, which is in the business of building plastic conduit infrastructure for the telecommunications industry.
40 plastic conduit bored; signal system controller upgrade, approx 110 ea; approx 650 lf 5/c traffic signal electrical cable; approx 1,357.