pneumatic system

pneumatic system

pneumatic systemclick for a larger image
A power system in aircraft that uses compressed air or another gas as the operating fluid. Some systems that are operated or powered by a pneumatic system are the landing gears or flaps in an emergency, the normal and/or emergency brakes, and the tail parachute deployment.
References in periodicals archive ?
The seminar will also explain how to understand the metrics and statistics for leakage in typical pneumatic systems and to identify methods for reducing compressed air losses in a typical pneumatic system.
Two actuators are available, including a pneumatic system or a digital electric drive package.
The pneumatic system has been designed to protect the operator from coming into contact with potentially contaminated particles that may be formed during the valve repair process.
A regenerative amplifier powers an actuator--it delivers 3,500 W while drawing an average 50 W from the battery--that powers a pneumatic system that actively counteracts the vibrations.
The 160 psi applied to the pneumatic system enables the airplane to operate the environmental control systems and the leading-edge flaps.
With different options available, the trait can be set up to be fed through a pneumatic system, extended apron or by hand.
In these days, at our department we have the possibility to work in laboratory of pneumatic system.
Beyond boosting fuel efficiency, the pneumatic system can provide a form of aerodynamic braking to assist the mechanical brakes.
If air is leaking from a pneumatic system in an improper fashion (sometimes caused by wear or poor engineering), that air--under pressure--can be driven into the vascular system of the patient when areas of open bleeding are present.
Features of the MC2555L include its own powerpack for self-sustaining operation, a closed pneumatic system that allows for quick recovery of launch pressures and short set-up (~15 minutes) and recovery (five minutes) times.
A pressurized pneumatic system removes chips from all reference areas prior to locking the pallet in place.
We would be interested in getting involved" in the development of a pneumatic system, he says.