polyurethane finish

polyurethane finish

An exceptionally hard and wear-resistant paint or varnish made by the reaction of polyols with a multifunctional isocyanate.
References in periodicals archive ?
While an oil finish is natural-looking and easier to maintain, a polyurethane or UV-cured polyurethane finish is more expensive because of the durability it offers.
Each bag features a soft leather lining and strap, and are topped off with a natural polyurethane finish to allow the wood grains to supplement the texture on each bag.
The stock and forend are of Turkish walnut and are nicely protected with a tough, semi-gloss polyurethane finish, and the wood-to-metal fit was flawless.
HMG Paints has introduced Acrythane ACE, a new high performance 2K Acrylic Polyurethane finish, to its portfolio.
It does not harm polyurethane finish and should have removed the hair spray.
These include pigmented polyurethane for interiors; UV curable range; wood preservation that protects against borer, termiteand common pest attacks; low VOC polyurethane clear coats and water based polyurethane finish. In addition, a range of high performance polyurethane finishes in gloss, silkmatt and pigmented were also launched under the Emporio brand.
You will need about two cans of paint, a paint or sponge brush, steel wool, sandpaper, and sealer or polyurethane finish.
In each case, the system is completed with a 2-pack gloss white polyurethane finish. All coating materials are supplied to HAL by Indestructible through its Indian distributor, Matcom of Bangalore.
Our hardwood floor has a polyurethane finish, but it always looks smeared, like there is a buildup on it.
In a previous study, it was found that surface roughness of various species affected their coating quality when a polyurethane finish was used (Jaic et al.
Manufactured from quality birch plywood with oil-stained polyurethane finish, the Dob Tracker II features a high-torque 110-volt AC motor that tracks celestial objects for up to 75 minutes before requiring a reset.
* The honeycomb-core Series 5700 VIBRALITE HC breadboards are constructed using corrosion-resistant, plated-steel hexagonal cell honeycomb with a 3/16" ferromagnetic stainless steel top skin and a bottom skin of 3/16" low-carbon steel with a polyurethane finish. This series provides high-static stiffness, and is available 2" or 4" thick in a variety of sizes up to 48" by 96".