The N2 BET method (Narkis and Ben-David, 1985) employing a Quantasorb surface analyser, QS/7, mercury intrusion porosimeter
, Micrometric model 9310 (Orumwense, 1996) was used to measure the surface area and porosity of the fly ash.
The morphology and specific surface area of pine biochar were determined at Scientific Institute of Thermal Insulation of Vilnius Gediminas Technical University using scanning electron microscope and mercury porosimeter
Quantachrome Poremaster PM-33-12, respectively.
A mercury porosimeter
using Hg penetration into the sample allowed the size and distribution of macro- and mesopores to be measured.
Lipiec J, Hajnos M, Swieboda R (2012) Estimating effects of compaction on pore size distribution of soil aggregates by mercury porosimeter
In order to compare methods and to have a second input regarding morphology quantification, the tested membranes were also analyzed with a mercury porosimeter
Porosity measurements are carried out with a mercury porosimeter
(Quantachrome Corporation, Poremaster 60, USA).
The pore size distribution of the samples was measured using a mercury porosimeter
7] explored dehydration kinetics of ulexite by TG, DTA and DTG and determined the structural changes in ulexite by means of X-ray diffractometry by scanning electron microscopy and mercury porosimeter
The pore size distribution of hardened pastes was determined by Hg-porosimetry using the POREMASTER-60-17 porosimeter
(Quantachrome Instruments, US).
Khan, et al 2012) characterized the formation as, "The porosity values determined with the Helium Porosimeter
for the Khewra Sandstone rangingfrom18.
18) Parameter HDS silica Conventional Silica Mercury porosimeter
Typical pore area Typical pore area is in the range of varies from 20-350 175-195 [m.
The porosity, pore diameter and pore volume of adsorbents were determined by Mercury Porosimeter
, Thermo Quest (Model No.