pressure angle


Also found in: Wikipedia.

pressure angle

[′presh·ər ‚aŋ·gəl]
(mechanical engineering)
The angle that the line of force makes with a line at right angles to the center line of two gears at the pitch points.
References in periodicals archive ?
The curve matched up with the load characteristics using Involute to achieve smaller pressure angle in heavy load area and using quadratic curve to achieve faster opening speed in light load area.
On the eve of one of the most important matches of her life, Saina played down the pressure angle.
Saina played down the pressure angle defeating Chew 19-21, 23-21and 21-13 to win the 38th gold for the country.
Data gathered by this system includes: mean peak pressure, standard deviation of peak pressure, mean peak pressure angle, standard deviation of peak pressure angle, compression pressure, percent noncombustion cycles, percent pre-combustion cycles, percent over-pressure cycles, and raw waveforms for manual analysis.
In several papers [2-5], the higher pressure angle profile for the drive side and lower pressure angle profile for the coast side have been considered.
2]" as initial data, the design engineer chooses, as designing variables, the pressure angle for the direct profile " [[alpha].
These 20-degree pressure angle precision gears conform to JIS B 1702 Grade 4 standards.
Precision 20o pressure angle stainless steel bevel gears from Quality Transmission Components are stocked in 24 sizes in modules 1.
of teeth = 30 Face Width = 15mm Outer Diameter = 48mm Bore = 15mm Hub Width = 14mm Hub Diameter = 38mm Hub bore = 15mm Pressure angle = 20 deg MOC: S45C medium carbon steelNo.
It was chosen the second method because it can be applied for any value of the module and pressure angle.
The threaded wheel has a rack or straight-sided shape, with the side angle corresponding to the pressure angle of the gear.