References in periodicals archive ?
The primary beam connecting the interior tube and the exterior tube can be regarded as a sort of outrigger beam.
In the experiment, four accelerometers were used to record the data, one at the base of the rig, one at the end of the primary beam, and two at opposite ends of the secondary beam.
Scattering inside the target material worsens the knowledge of the momentum and direction of the primary beam and broadens the reconstructed missing mass spectrum.
This, in particular, is true for PE-LD, as concluded from the anisotropic azimuthal scattering of the (110) and (200) lattice planes, when the blown films were analyzed with the primary beam parallel to ND (Fig.
The physical reason for the low-angle Bragg (MB) scattering is associated with the initial diffusion of the primary beam in intersection of a large number of boundaries and can be used for determining the number of these boundaries [4].
As the surface is shiny object mirror, a mirror reflection of the primary beam. If the surface is transparent, open beams representing the light reflection and refraction by the optical properties of transparent material.
As the surface is shiny and mirrored objects, a mirror is reflection of the primary beam. In the case the surface is transparent, created beams are representing the light reflection and refraction by the optical properties of transparent material.
The conceptus doses fall well below 10 mGy, assuming the uterus is either not in the primary beam or is shielded.
The combination of a heterogeneous primary beam and diverging and attenuated photons results in intensity loss, which is the amount of energy per area and per unit of time.
In this case, the polarized neutron beam becomes slightly more divergent and reflected by an angle of approximately 1[degrees] with respect of the primary beam. Polarized neutron fluence rates of 5 X [10.sup.8] [cm.sup.-2][s.sup.-1] are routinely achieved for experiments.
The aluminium portals are supported on the primary beam and have oak slats on each side of their webs so that the glazing can be fixed with the necessary degree of stiffness.