process technology

(redirected from process node)

process technology

The particular manufacturing method used to make silicon chips, which is measured by how small the transistor is. The driving force behind the design of integrated circuits is miniaturization, and process technology boils down to the never-ending goal of smaller. It means more computing power per square inch, and smallness enables the design of ultra-tiny chips that can be placed almost anywhere.

Feature Size Measured in Nanometers
The size of the features (the elements that make up the structures on a chip) are measured in nanometers. A 22 nm process technology refers to features 22 nm or 0.022 µm in size. Also called a "technology node" and "process node," early chips were measured in micrometers (see table below).

Historically, the feature size referred to the length of the silicon channel between source and drain in field effect transistors (see FET). Today, the feature size is typically the smallest element in the transistor or the size of the gate.

From 1,000 Down to 90
The feature size of the 486 chip in 1989 was 1,000 nm (one micron). By 2003, it was 90 nm, reduced by a little less than one millionth of a meter. What may seem like a minuscule reduction took thousands of man years and billions of dollars worth of R&D. In the table below, note the dramatic reductions in the early years of semiconductors.

It's Not Always Smaller
In the semiconductor industry, the goal has always been to pack more transistors on the same square millimeter of silicon. At any given time, the smallest feature sizes are found on the latest, high-end CPUs chips that can cost several hundred dollars. However, 8-bit and 16-bit microcontrollers (MCUs) are used by the billions and sell for only a couple dollars. They have far fewer transistors and do not need to be so dense. A USD $2 microcontroller may have feature sizes similar to the high-end chips a decade or two earlier. See microcontroller.

A Miracle of Miniaturization
To understand how tiny these transistors elements are, using 10 nm feature sizes as an example, eight thousand of them laid side-by-side are equal to the cross section of a human hair. See half-node and active area.

Half a Micron Is Huge
In a span of five years, the feature size on these AMD chips was reduced from .8 to .35 microns. Half a micron may seem insignificant, but not in the microminiature world of semiconductor manufacturing. As features get smaller, the chip runs faster and uses less energy to perform the same processing. (Image courtesy of Advanced Micro Devices, Inc.)

Semiconductor Feature Sizes(approximate for all vendors)       Nanometers  MicrometersYear     (nm)        (µm)

 1957   120,000      120.0
 1963    30,000       30.0
 1971    10,000       10.0
 1974     6,000        6.0
 1976     3,000        3.0
 1982     1,500        1.5   **
 1985     1,300        1.3   **
 1989     1,000        1.0   **
 1993       600        0.6   **
 1996       350        0.35  **
 1998       250        0.25  **
 1999       180        0.18  **
 2001       130        0.13  **
 2003        90        0.09  **
 2005        65        0.065
 2008        45        0.045
 2010        32        0.032
 2012        22        0.022
 2014        14        0.014
 2017        10        0.010
 2018         7        0.007
 2019         5        0.005

 Method       1        0.001

 ** Still used for MCUs that do not
    require state-of-the-art
    technology (see  microcontroller).
References in periodicals archive ?
PLDA, the industry provider of PCI Express[R] IP and interconnect solutions, has announced a major PCIe 5.0 design win on cutting edge 5nm process node, the company said.
PLDA has unveiled a major PCIe 5.0 design win on cutting edge 5nm process node. PLDA's PCIe 5.0 Controller IP was selected not only for its solid design and unmatched compatibility with popular PCIe PHYs, but also for PLDA's best-in-class tech support, its ease of customization and PLDA's integration expertise.
Prima facie the models with the R0 stepping seem to come with the same base clock speed, same amount of cache, and seem to be fabricated under the same 14-nanometre process node.
The world's largest memory chip maker said it is now capable of responding better to global demand with the new DRAM as 1z-nm becomes the industry's smallest memory process node.
'This transceiver, verified for TSMC's 40LP process node, is a standard CMOS implementation designed for SoC integration and chip production.
In a blog posted yesterday, AMD (AMD) Chief Technology Officer Mark Papermaster said that AMD is "making the strategic decision to bet big on the 7nm process node." He added: "While it is still too early to provide more details on the architectural and product advances we have in store with our next wave of products, it is the right time to provide more detail on the flexible foundry sourcing strategy we put in place several years ago.
Samsung has launched production of new 32GB DDR4 memory designed for notebooks built on the 10nm-class process node.
The Cadence Genus synthesis solution is a next-generation, high-capacity RTL-synthesis and physical-synthesis engine that addresses the latest FinFET process node requirements, improving RTL designer productivity by up to lOx.
Some of you may recall that AMD and Nvidia launched their 14nm refreshes only after that process node had been used for mobile products and was ostensibly on its second revision.
In this case, the conjunction and is observed as a process node and placed at the top of the hierarchy under which we then place verbs occurred and became.
"Using the new 10nm process node is expected to allow our premium tier Snapdragon 835 processor to deliver greater power efficiency and increase performance while also allowing us to add a number of new capabilities that can improve the user experience of tomorrow's mobile devices."
A flexible radio interface allows the platform to be deployed with either RivieraWaves RF or various partners' RF IP, enabling optimal selection of foundry and process node.

Full browser ?