profile thickness

profile thickness

[¦prō‚fīl ‚thik·nəs]
(aerospace engineering)
The maximum distance between the upper and lower contours of an airfoil, measured perpendicular to the mean line of the profile.
References in periodicals archive ?
block window pvc opv 1850 * 1200 / 2 / 1 1-3 1108-2017 five-chamber profile, profile thickness 70mm, white, pvc handle-1pc, clip hidden, double-glazed window (4i-14ar -4-14ar-4i), frosted glass, complete with hydro- and vapor-protective films along the perimeter l = 6.
The camera captures the intensity of the emitted light from the sample, which, through Beer-Lamberts law, is linearly proportional to the film profile thickness:
extruder, providing profile outputs up to 800 lb/hr, depending on profile thickness and fiber content.
Micro-Epsilon's thicknessCONTROL BTS 8104 system measures profile thickness of non-conductive blown film, including film used for packaging, agricultural applications, waste bin liners, carrier bags, freezer bags and shrink covers.
Also new from Zumbach is the UMAC ultrasonic system to measure profile thickness under water inside sizing tanks.
The structured light scanning and projection system developed to aid in the measurement and sanding of F-35 inlet coatings features the ability to use scans before and after the application of coatings to calculate profile thickness measurements.
Tenders are invited for Expanded Polyurethere Sheet For Carpet Inlay Or Profile Thickness 10Mm, Width 150Cm Weight 180Gm / Square Meter Minimum.
The subject of the public contract is a new solution of paving I profile thickness of 10 cm over the entire surface of the object dead center "L" and a new replacement solution for sheet roofing system Sika adhesive thickness of 2 mm.
While traditional notebooks can weigh up to 2.6 kg and have a 3.5 cm profile thickness, the new ultrathin laptop generation offers weights as low as 1.5 kg and only a 2.1 cm profile thickness.
(Type V profiles include a synthetic retention sheet under the granular media layer.) Types III and IV also integrate well to allow seamless transitions across different profile thicknesses. Finally, these two profiles uniquely accommodate base-level irrigation, which delivers water at the root level (as opposed to surface spray or drip), minimizing direct evaporation and many maintenance concerns.
By inspecting the metal profile system he has calculated, The contractor must prove that the profile thicknesses match the dimensions of the existing profiles.