Then the two output

quantization level values [a.sub.i] and [b.sub.i] can be calculated as follows

This paper presents the experimental method conducted to find the effective

quantization level of the depth map for generating reliable, accurate multiview intermediate images for a multiview 3D display system.

The next

quantization level time-point is calculated based on given differential value with integrator object.

Firstly, a 3 dimensional array is pre-defined and a number of tessellations contain in the pre-defined 3D array is determined by the

quantization level. Secondly, one of a minutia is selected as reference minutiae and other minutiae are translated and rotated based on this reference minutiae.

where x is coordinate of 3D bin, i is the index of anchor, [t.sub.i] is the i-th step of anchor, [q.sub.i] is

quantization level, [DELTA] is a constant quantization step.

In the multi-bit system, each

quantization level is converted to binary form by using Gray Code.

Data acquisition systems quantize the sampled data to generate digital signals with a

quantization level that is supported by the ECU.

K is the

quantization level and i is the imaginary unit.

Suppose that the

quantization level of the quantizer is equal to 2N + 1, N [member of] N.

The payload of each packet varies from 60 bytes to 500 bytes depending on the number of values that are grouped and the

quantization level that is used.

Quantized(x) is quantized effect drawing, q is

quantization level, [DELTA]q controls the width of quantization range, [q.sub.nearsst] is the edge information that is the nearest to f([??]) and [phi] is the parameter that controls the transition sharp degree between two quantization range.

In previous researches several methods for design of TIQ-comparator have been studied, such as: the analog input signal

quantization level is set in the first stage by changing the voltage transfer curve (VTC) by transistor sizing (TANGEL; CHOY, 2004) and (SUDAKAR et al., 2011), the size of both transistor channel lengths, L and width, W are adjusted (YOO et al., 2003), third, by only adjusting W and L is fixed (TANGEL; CHOY, 2004).