rack panel

rack panel

[′rak ‚pan·əl]
(electronics)
A panel designed for mounting on a relay rack; its width is 19 inches (48.26 centimeters), height is a multiple of 1 ¾ inches (4.445 centimeters), and the mounting notches are standardized as to size and position.
References in periodicals archive ?
Tenders are invited for fabrication and erection of 1.50 x 1.50 m roller type service gate (gate leaf, embedment parts and 12 mt screw stem hoist), and trash rack panel ( trash rack panel, embedment parts and lifting beam with hoisting portal) a for haldipurani lift irri
The power supplies are 1.7" high, and they can be mounted on a small 1U rack panel.
However, Mike had to wait until 2005 to have the rack panel scored by P&Y officials.
Tenders are invited for fabrication and erection of 1.40x1.0 m roller type service gate (gate leaf, embedment parts and 12 mt screw stem hoist)and 1.40x2.5 m size trash rack panel ( trash rack panel, embedment parts and lifting beam with hoisting portal) a for lal nala
Tenders are invited for Manufacturing and erection at site Track rack Panel with Embedments of Size 7 x 3.5 MTr.
approximately 34 pieces of equipment for 2-bed rooms (2 patient cabinets, Frame superstructure, Tv panel, Wardrobe panel, Wall protection panel) made of hpl-coated or melamine resin-coated flat chipboard approximately 12 pieces one-bed room unit (1 patient cupboard, Frame superstructure, Tv panel, Coat rack panel, Wall protection panel) made of hpl-coated or melamine resin-coated flat chipboard approximately 28 units built-in furniture with high, Low and overhead cabinets, Made of hpl-coated or melamine resin-coated flat-particle board; Including various electrical appliances approximately 340 m solid wood handrail with stainless steel brackets
Tenders Are Invited For Removing Fabrication Painting And Erection Work Of Trash Rack Panel Of Size 3 X 2.5 Mtr.
1 patch panel rapco custom 2 space rack panel loaded w/2 neutri ck nl4mp out; 1 gtsa-key61 gator gtsa-key61 61 key rolling keyboard case; 1 stonks8291 keyboard stand, on st age, lok-tight pro double x; 1 syyamx61 synthesizer, yamaha, mx-61; 2 carapnjb3 rapco, pnjb-3 3-ft mic cable; 2 dbradb1 rapco, db-1 direct box; 5 mishbeta98hc mic, shure, beta 98h/c mini supercardoid condenser; 1 nspl24x8-100 rapco 100~ custom snake; 5 carapnjb20 rapco, pnjb-20, 20-ft mic cable; 2 cw218v yamaha dual 18" sub; 2 c215v yamaha c215v speaker.
Tenders are invited for Trash rack panel emb for kal project
Tenders are invited for Fabrication and erection of cantilever hoisting arrangement (railing arrangement) of lifting trash rack panel for urmodi lift irrigation scheme stage - ii kombadwadi, dist.
A similar strategy was employed at Radio PIK Bydgoszcz, where the main on-air studio was upgraded with Lawo sapphire fader panels and central control section using the frame of a previously installed zirkon console, plus two Lawo KSC rack panels. Radio PIK's remote studio in Torun was also modernised with the installation of an eight-fader Crystal console.
Tenders are invited for to carry out job work required for manufacturing transportation and erection of trash rack panels of size 1 5 m x 2 1 m 2 nos and its embedments and a frame for sliding type canal regulating gates of 1 5 m x 1 5 m size at tembhu lis stage v bhood