recovery temperature

[ri′kəv·ə·rē ‚tem·prə·chər]

(fluid mechanics)

Mentioned in ?

References in periodicals archive ?

Warm forming passes with partial strain hardening of metal above recovery temperature and below temperature of recrystallization (Forejt & Piska, 2006).

Plasticity and workability of aluminium alloy at warm

Thus, the recovery temperature may approach or even exceed the effective [T.

The effect of weathering and thermal treatment on the scratch recovery characteristics of clearcoats

6[degrees]C) higher than the heat recovery temperature and approximately 7[degrees]F (3.

Energy monitoring and building simulation of a university laboratory research facility

The two points with a low minimum main floor temperature that only took a single furnace cycle to reach the recovery temperature just barely exceeded it, by ~0.

The effects of thermostat setback and setup on seasonal energy consumption, surface temperatures, and recovery times at the CCHT twin house research facility

Besides, the strain recovery kinetics depends on recovery temperature ([T.

We can observe an increase in apparent activation energy with recovery temperature (or recovery time) from [similar to]220 to [similar to]650 kJ/mol.

pl] recovery kinetics shows that the associated apparent activation energy diminishes as recovery temperature increases.

The role of anelasticity in high stress mechanical response and physical properties of glassy polymers

The process passes at temperatures which are over recovery temperatures but below down hot forging temperatures.

Optimization and verification of warm forging temperature of steel

Plasticity and Workability of Aluminium Alloy at Recovery Temperatures, Annals of DAAAM for 2010 &Proceedings of the 21st International DAAAM Symposium, 20-23rd October 2010, Zadar, Croatia, ISSN 1726-9679, ISBN 9783-901509-73-5, Katalinic, B.

Uniform induction heating solutions determined by numerical simulation

Encyclopedia browser ?

Full browser ?

CITE

Site: Follow: Share:

Open / Close