reducing pipe

reducing pipe

A pipe coupling, with inside threads, having one end with a smaller diameter than the other; both openings have the same center line; for connecting pipes of different size.
References in periodicals archive ?
A single multivariable DP instrument can measure gauge or absolute pressure, differential pressure, and temperature, overcoming the problems associated with multiple instruments by reducing pipe intrusions and the opportunities for leaks while facilitating regulatory compliance.
The Kahramaa president pointed out that Qatar has become reached a record in reducing pipe water leakage to a mere 4% due to the use of Smart Code, which detects the points of leakage in the water pipes accurately so as to be sealed.
This increased focus on automation and yard optimisation is aimed at reducing pipe fabrication man-hours, improving safety, eliminating unnecessary material wastage and improving the quality of the group's products and services," a Lamprell spokesperson said in a statement.
Time Interval Division of Reducing Production Process and Analysis of Quality Influential Factors of Reducing Pipe
2) Design all your plumbing in one general area, reducing pipe distance.
This procedure attempts to minimize cost by reducing pipe size as much as possible, but then taking full advantage of the resulting pipe size to minimize [DELTA] to reduce chiller energy.
Additionally, the floor provides even more low-thermal-conductivity high thermal mass material near the pipe, increasing the heat energy storage potential of the surroundings, still further reducing pipe heat loss compared to the bare attic configuration.
All the motors are coordinated to run at the same speed, reducing pipe chatter and cleat wear.
According to Charlton, older cast iron pipes develop calcium deposits, significantly reducing pipe capacity.
This enhanced flow efficiency has also been observed to improve single-phase gas and single-phase liquid flows by reducing pipe wall friction and reducing pressure losses.
This solution is the use of foam technology as it can produce a backfill with the combined benefits of both a paste and a hydraulic fill because the foam produces a 'pseudo' low density slurry making pipeline pressures low and reducing pipe wear rates during transport.