Speaking mostly in Filipino, Gatchalian said through the program, they hope to encourage proper use and disposal of plastics as it also has positive effect to the environment and through the program, to help improve the living condition in Valenzuela City by converting these residual wastes either into cash or food items.
an innovative social enterprise which manufactures alternative construction materials, will use these residual waste as raw materials for eco-bricks.
A Houston-based company, Auto Financial Group (AFG) provides an online, residual
based, walk-away vehicle financing product called AFG Balloon Lending, as well as vehicle leasing and vehicle remarketing to financial institutions across the United States.
The resultant transverse residual stress remaining in the corner section outer surface at the end of bending and subsequent elastic spring back is calculated by combining the bending and spring back stresses from Equations 20 and 22:
The resultant transverse residual stress remaining in the corner section inner surface at the end of bending and subsequent spring back is calculated by combining the bending and spring back stresses from Equations 21 and 23 as given below:
The capillary number Ca = [[mu].sub.p]GH/[sigma] represents the ratio of viscosity force to interfacial tension , [[mu].sub.p] represents the viscosity of polymer solution, [[mu].sub.o] represents the viscosity of residual oil, and the viscosity ratio of residual oil and the polymer solution is [[lambda].sub.[mu]] = [[mu].sub.o]/[[mu].sub.p].
where [sigma] represents the interfacial tension between polymer solution and residual oil, [partial derivative]B the residual oil surface including point [x.sub.B], [kappa] the curvature of residual oil surface, n the outer normal unit vector of residual oil surface, and [delta](x - [x.sub.B]) is the [delta] function of the second order.
As can be observed from the previous studies, the residual
stresses of composite component have received tremendous attention.
Results: HPLC showed statistically significant differences among two groups (P < 0.05) in the amount of eluted monomer There were significant differences at one hour (T 1) (p = 0.001), at two hours (T2) (p = 0.011) and insignificant difference (p = 0.606) was observed at the six hours (T3 ) interval in the residual
monomer release in two groups.
In this work, quenching residual
stresses in T-section 7050 aluminum alloy forging were studied by a combination using of finite element analysis and three experimental methods according to the forging geometry.
Using these techniques, I find residual
Experimental Study of the Residual
Stress of Cold Roll-Beating of an Involute Spline