return idler

return idler

[ri′tərn ‚īd·lər]
(mechanical engineering)
The idler or roller beneath the cover plates on which the conveyor belt rides after the load which it was carrying has been dumped.
Mentioned in ?
References in periodicals archive ?
Available in dual or single configurations, the units are mounted on the conveyor frame directly after the return idler to ensure belt alignment throughout the cleaning process and to allow proper time for moisture evaporation on the return trip.
The lightweight SafeGuard return idler guard is designed to prevent injuries from pinch points and to catch the return idler if it should fall.
Tenders are invited for procurement of return idler for 750mm, wide conveyor
Available in two configurations--dual and single cleaner systems--the units are mounted on the conveyor frame directly after the return idler to ensure belt alignment throughout the cleaning process and to allow proper time for moisture evaporation on the return trip.
According to ASGCO, one of the most easily preventable conveyor accident sources is a dislodged return idler falling onto an unsuspecting worker.
Tenders are invited for Supply of Idlers & Rollers For Conveyor Belts Return Idler 1000 Mm Belt Roller Length - 1150 Mm; Shaft Length - 1180 Mm; Tube- 139.7 Mm X 4.85 Mm Nominal Thickness; Shaft At Bearing - 25 Mm Part No.
Available in two configurations, a Dual Cleaner System and a Single Cleaner System, the units are mounted on the conveyor frame directly after the return idler to ensure belt alignment throughout the cleaning process and to allow proper time for moisture evaporation on the return trip.
Named the Urathon Beater Roll, the design coupies a common, CEMA-rated return idler and a series of urethane lobed discs.
Limited Tenders are invited for Barrel of size 159 mm dia x 900 mm long with bearing housing welded at both the ends for return idler of 1600mm
Tenders are invited for supply of troughing idler frame, sa top idler frame for 140 mm belt, return idler bracket and sa top idler frame for 1800 mm belt of chp, dudhichua.
Limited Tenders are invited for Shaft of size 40/42 dia x 1180 long for return idler of 2000mm conveyors
Limited Tenders are invited for Labyrith ring ( inner & outer ) for troughing idler and return idler of 2000 / 1800 / 1500 mm conveyor