The rivet spacing (RS), the rivet edge distance (ED) and the rivet hole
diameter (RD) were selected as riveting parameters.
In this condition, the plate tears from a rivet hole
to the edge of the plate or to another adjacent rivet hole
Because I was using a non-standard rear trunion it turned out that the rear rail hole fell just about half way over the existing rivet hole
for the trunion.
Start by measuring from the center of the rivet hole
nearest the handle's butt end to the bottom of the handle.
The sheath can be hung around the neck by adding a length of chain, leather, or cord though the bottom rivet hole
located on the base.
This paper presents an application of parametric finite element modeling, in the case of a lap joint with one rivet and a symmetrical crack developed at the rivet hole
in one strip.
(We'll tell you how to achieve the proper tension in the next paragraph.) Flatten the end of the new extractor (the end opposite the rivet hole
), place the extractor inside the bolt rim, and align the extractor/ bolt-rivet holes.
Instead of drilling straight through (and maybe missing the rivet hole
on the sleeve's other
Snap the extractor under the bolt rim, and align its rivet hole
with the one in the bolt.
Photo: Using rivet hole
in shovel neck as a guide, drill through new handle (left); insert new rivet and flatten end (right)