root face

root face

[′rüt ‚fās]
(metallurgy)
The part of a fusion face that is not beveled in a welding operation.
References in periodicals archive ?
The Butt Welded Test Specimen Prepared Using The Subject Electrode Shall Pass 180 Degree Transverse Bend Test Both Root Face Bends On Testing As Per Is 3600-83 Part-5 With Mandrel Dia D Being 3T T - Thickness Of The Parent Material.
"Body Shop products are my favourites and I have daily must-haves too, such as maca root face protector, which I use to help prevent redness and protect my skin from the wind.
Following removal of excess material from the coronal root face, a light-curing unit is applied to the end of the plastic post to transilluminate light along its entire length to polymerize the surrounding composite resin.
The sectioned root face was the reference point from which all measurements were taken.
I like the Mava Root Face Scrub from The Body Shop, pounds 8.30, as it rinses easily unlike some thicker scrubs.
As noticed in (1), the are two ways of rooting an embedding of a directed edge-rooted graph in order to get a rooted map, since there are two ways of choosing the root face adjacent to the root edge.
Following apicectomy, important steps of root-end management include adequate heamostasis, intraoperative staining (methylene blue) and meticulous examination of the cut root face using magnification devices (surgical microscope, endoscope) (4).
Transverse Bend Test Both Root Face Bends On Testing As Per Is:3600-83 Part-5 With Mandrel Dia D Being 3Tt.
The Butt Welded Test Specimen Prepared Using The Subject Electrode Shall Pass 180 Degree Transverse Bend Test Both Root Face Bends On Testing As Per Is:3600-83 Part-5 With Mandrel Dia D Being 3T T- Thickness Of The Parent Material .
The Electrode Shall Be Approved By Rdso Under Irs Class D Of Irs M 28/2002 To The Code E8018 W Of Aws A.5.5 Or To The Code E8018 W2 Of Sfa 5.5 The Butt Welded Test Specimen Prepared Using The Subject Electrode Shall Pass 180 Degree Transverse Bend Test Both Root Face Bends On Testing As Per Is:3600-83 Part-5 With Mandrel Dia D Being 3T T- Thickness Of The Parent Material.The Electrode Shall Be Operatable On Ac As Well As Dc In Which Dc Positive Is Mandatory.
Transverse Bend Test Both Root Face Bends Ontesting As Per Is: 3600-83 Part-5 With Mandrel Dia D Being 3Tt-Thickness Of The Parent Material.
Transverse Bend Test Both Root Face Bends Ontesting As Per Is:3600-83 Part-5 With Mandrel Dia D Being 3Tt-Thickness Of The Parent Material.