The rotary joint
, RJ, allows the fiber to rotate without twisting that can affect or even damage the waveguiding property of the fiber.
Description Parameter Design size (mm) The radius of the 2nd-stage targeting device R 30 The thickness of each layer of the baseboard s 2 The vertical distance between rotary joint
h 5 and the baseboard The radius of rotary joint
of the magnetic pin [R.sub.b] 3 The distance from the rotary joint
of pin to [R.sub.m] 18 the center of the board The diameter of the hole on the conductive ring d 3.8 TABLE 2: Time used in the drilling tests.
In the measurement plane parallel to the system of measurement (sagittal plane), the results showed that the rotary knee joint evinces mobility between a fixed marker located on the thigh and the rotary joint
estimated from the magnitude [r.sub.JC/B,] which is not constant.
Presented are S-parameter measurements of the straight and bent monopoles, with and without the introduction of the rotary joint
. Minimal deviations are observed after including both bends and rotary joints
in the antenna construct, indicating the design modifications have not degraded the antenna's performance over the system's operating frequency range (500-3000 MHz).
Discovery astronauts will spend an extra day at the International Space Station to further study a damaged rotary joint
. The joint, which allows the outpost's solar array to track the Sun to power the station, has been fouled by metal shavings that could cause damage.
They removed the launch locks holding the 10-foot-wide solar alpha rotary joint
in place, and helped retract an older solar array to make room for the new array's path.
This dual-channel waveguide rotary joint
is designed for radar applications at X-band (9 to 9.5 GHz) and Ku-band (12.85 to 14.15 GHz).
A multi-pass Fiber Optic Rotary Joint
(FORJ) allows optical signals to pass from a stationary structure to a rotating mechanism in a fiber optic system.
and Mexico through its new Maier America LLC, which is a rotary joint
distribution, training and service center in Duluth, GA.
The K-Control system overcomes this limitation by means of an electrical rotary joint
or slip ring that can withstand high oven temperatures.
The two platforms are connected with the microwave rotary joint
, a VHF capacitive coupler and a DC rotary joint