Contract Awarded for Two terminal equipment for connecting rod rough grinding
and fine grinding,1 set
Ideal for edge grinding as well as weld-seam dressing, the heavy duty construction of the CC-GRIND SOLID even makes them suitable for very rough grinding
applications but they are not recommended for circumferential grinding such as on root-pass welds in pipeline construction.
They are deemed as economical and efficient products for surface polishing, chamfering, deburring, descaling, rough grinding
, lapping, and smoothing to meet customers' requirements.
I remember hearing famed telescope guru John Dobson proclaim, "Mirror making is caveman work--eat well, sleep well, and work like hell!" And there's little doubt that the most caveman-like part of the process is rough grinding
. That's the stage in which you carve the initial curve into the surface of a glass blank.
Economical reasons require a splitting of the grinding process into a rough grinding
and a finishing part.
The accuracy of the machining that is performed by the RFK machines is said to be so accurate that rough grinding
can be eliminated.
For rough grinding
the Sigma Green wheel has a zirconia/ceramic grain with a proprietary bonding and wheel design for cuts up to 50% faster than aluminum oxide.
The Equiptop ASDII automatic surface grinder features a new control panel with quick digital output feedback by encoders and digital display for setting start points, rough grinding
volume, finish grinding volume, down feed volume for finish grinding, target point, rise up point, intermittent spark-out, and spark-out.
Cotton fibers will hang up on projections caused by rough grinding
. The ground surface finish should not exceed 16 micro-inches for utility slitting.
Recommended applications for the Z-Stainless flap discs include rough grinding
and finishing, intermediate grinding and finishing of welds, deburring, deflashing, rust removal, snagging, surface finishing, cleaning, blending and stock removal.
After rough grinding
, the castings move across an industrial roadway into a new building converted in the summer of 1999 for finishing operations (including a dippainting operation) and short-term storage before shipping.
Sample surfaces; - 157.00 m 2 rough grinding
; - 157.00 m 2 Fine grinding R9; Screed work: - 21,80 m 2 cement screed, 45 mm; - 9.00 m 2 cement screed as a rapid screed, 45 mm; - 21.40 m 2 composite cement screed, 59 mm; - 95.20 m 2 composite cement screed, 50 mm; - 87.20 m 2 composite cement screed, 39 mm.