Alloys Unlimited and Processing is also a provider of specialty services including precision saw cutting, CNC machining,
rough turning and boring, heat treating, and trepanning.
The measured values are represented in Table I (
rough turning), and Table II (finish turning).
The cycle times obtained after optimizing the turn-mill process in SolidCAM software, when machining on CNC multitasking lathe according to the first operation belonging to the second variant are the following: 0.18 min for the face turning; 0.91 min for the
rough turning; 0.23 min for the finish turning; 0.88 min for the drilling; 0.81 min for internal turning; 1.7 min for the face milling; 2.81 min for the radial milling.
This study developed a chip control system for
rough turning that monitors the breaking of chips, estimates the length of the chips and eliminates continuous chips if those are formed.
Operations then included
rough turning, finish turning, and drilling.
Typically in
rough turning, you can select a high enough speed rate to break a chip.
He got shuffled back at the start, I didn't really want to be that far back and it got very
rough turning for home.
He got shuffled back at the start - I didn't really want to be that far back, and it got very
rough turning for home.
Its primary target area is a depth of cut of 0.060" and greater, and feed rates from 0.008 to 0.032 ipr for medium to
rough turning of steels.
The challenge is taking a solid piece of stock and
rough turning the part shape with numerous straight cuts.