roughing tool
roughing tool
[′rəf·iŋ ‚tül] (engineering)
A single-point cutting tool having a sharp or small-radius nose, used for deep cuts and rapid material removal from the workpiece.
References in periodicals archive
?
Tenders are invited for supply of roughing tool for the ctv milling machine of valladolid
With better region detection, it is more stable and precise to get the desired roughing tool path directly on 3D designs with less machining time.
Each kit comes with left and right rubber pieces, Soletrack extra strong polyurethane adhesive glue and a roughing tool (for scoring the shoe surface for greater sticking power).
The feed rate is 75 ipm, and in the first operation a 0.625" roughing tool mills to a depth of 1".
A brazed-carbide plunger roughing tool was engineered to deliver a unique combination of high wear resistance at the cutting edges and toughness in the body to absorb the high levels of vibration associated with titanium cutting.
A drill is a roughing tool, so if we desire a more precise hole for tapping, the hole will need to be reamed.
"With ECM, we can cut multiple slots in a single machine cycle, and eliminate the need for sharpening the roughing tool," said Schubert.
R4 is well-suited for continuous or interrupted cuts and is a good general purpose tool as well as a roughing tool. C2 is ideal for low carbon steels and gummy materials.
"We can use three tools to make a part, including a roughing tool, intermediate tool, and finishing tool on each," says Teumer.
It may include roughing tool and toolpath, finishing tool and toolpath, drill tooling and drill routines.
And machining operations call for high-performance roughing tools promising long life.
This allows the use of other approaches and also some of the new application-specific plunge roughing tools, which require a short forward step (for example, 20% of the tool diameter).
Encyclopedia browser
?
- ▲
- Rough River Dam State Resort Park
- rough rolled glass
- rough rubble
- rough sawn
- rough service lamp
- rough sill
- rough string
- rough stringer
- rough threading
- rough turning
- rough work
- roughage
- rough-axed brick
- roughback
- roughcast
- roughcast glass
- rough-cut joint
- roughened finish tile
- roughening transition
- rougher cell
- Rough-hewn
- Rough-in
- roughing
- Roughing It
- roughing stand
- roughing tool
- roughing-in
- roughing-out
- roughness
- roughness elements
- roughness factor
- roughness length
- Roughness-Width Cutoff
- Rough-sawn
- roughshod
- Rouhani, Hassan
- Roulade
- rouleau
- Roulers
- roulette
- Roumain, Jacques
- Roumania
- Roumanille, Joseph
- Roumelia
- round
- round angle
- round arch
- Round Arch style
- Round barn
- Round Billet
- round billet molding
- ▼
Full browser
?
- ▲
- roughie
- roughie
- roughie
- roughie
- roughies
- roughing
- roughing
- roughing
- roughing
- roughing
- Roughing after Whistle
- roughing her up
- roughing in
- Roughing It
- Roughing It
- Roughing It
- Roughing It
- Roughing It
- roughing me up
- roughing one up
- roughing out
- roughing out
- roughing out
- roughing out
- roughing out
- Roughing rolls
- roughing somebody up
- roughing someone up
- roughing stand
- roughing them up
- roughing tool
- roughing up
- roughing up
- roughing up
- roughing up someone
- roughing us up
- roughing you up
- Roughing-in
- Roughing-in
- roughing-out
- Roughings
- roughish
- roughish
- roughish
- roughishly
- roughleg
- roughly
- roughly
- roughly
- roughly
- roughneck
- roughneck
- Roughneck Airsoft Detachment
- roughnecked
- roughnecked
- Roughnecks
- Roughnecks
- Roughnecks: Starship Troopers Chronicles
- roughness
- roughness
- roughness
- ▼