saw kerf

saw kerf

A kerf, 2, or slot, which is cut into wood by a saw.
References in periodicals archive ?
The best way to deal with this situation is to cut down about two-thirds of the way through the log--or until the saw kerf just starts to close up above the bar.
You can feel compression forces as they begin to bind your bar and can see tension as the saw kerf gradually opens.
Sawdust volume was computed by multiplying one-half the saw kerf by the surface area of the board (Ernst and Pong 1985).
The auto-shifting material support grids and auto-inserting saw kerf splitting wedge prevent binding, while the steel support rollers ease material handling and a center material support shelf allows operators to stand erect while cutting smaller parts.
015" was necessary to allow for variation in saw kerf (width of the cut made by the saw that is a representation of the output of the saw sharpening process).
The resaw has measurement accuray and the smallest possible saw kerf for high material yield.
They also have a smaller saw kerf and yield more parts per crystal.
And for those who want something above and beyond, the Carlisle Custom Shop offers several hand-made surface treatments including foot-worn and saw kerf patterns.
So until you've mastered this skill, it's best to start far enough away to leave a bit of wood showing between the line and the saw kerf.
The basic log and sawing elements that comprise this mathematical problem are diameter, length, log taper, saw kerf width, dimension of the wood product, and saw blade arrangement, i.
When the tree fall begins (You'll see the saw kerf begin to widen), shut the saw off and get away with deliberate speed.
Photo: Cut a shallow saw kerf with a table saw (shown) or a radial-arm or hand-held circular saw.