settling time


Also found in: Wikipedia.

settling time

[′set·liŋ ‚tīm]
(control systems)
References in periodicals archive ?
Tenders are invited for providing and implementing the system for settling time and costs of stay of children in kindergartens run by the city of rybnik
Grinding aids are doesn't only improves the grinding efficiency, but also improves several other properties of the composite cement such as strength, settling time, workability amongst others.
* voltage settling time ([t.sub.sV]), calculated as the time required to settle the voltage within the [+ or -]4 V band around [V.sub.0] = 400 V;
* Superior motion performance - Advanced Vibration Suppression Control II[TM], One-Touch Tuning[TM], 4 million pulse encoders, and 2.5 kHz speed frequency response reduces settling time and minimizes overshoot.
In order to compare the results from different test cases, two evaluation parameters are introduced, the detumbling time ([t.sub.d]), here defined as the time to reduce by two orders of magnitude the initial T[.sub.r] and the settling time ([t.sub.s]), namely the time at which the measurement error enters and remains within the error band [+ or -] 0.2 deg/sec.
The following performance measures were introduced to facilitate a comparison with the other control methods: the settling time defined as the time taken until the output finally settles within 2% of the steady state value; the rise time, [T.sub.r], defined as the time taken by the output to change from 10% to 90% of its final value; and, in addition to the IAE, the integral squared error (ISE) and the time weighted absolute error (ITAE) computed as follows:
The effects of dose rate and settling time of solids were observed for TSS, BOD5 and COD removal.
With millisecond response and settling time and high dynamic linearity, the new S-335 fast-steering-mirror (FSM) platforms broaden the vendor's portfolio of piezo steering mirrors.
Contributing to that is a light-weight arm with an optimized structure, which helps contribute to reduced shaft whip and settling time.The electrical wiring are embedded in the arm, which provides not only a compact footprint, but avoids interference with peripherals.
The Waltham RMC facility maintains two sedimentation basins to increase settling time prior to discharge.
A deadbeat control algorithm is used when a rapid settling time is required.
The step response of MRAC with MIT rule in fig.7 shows oscillations and large settling time. Hence the result is not satisfactory.