shear connector

shear connector

1. A connector (such as a welded stud, spiral bar, or short length of channel) which resists horizontal shear between elements of a composite beam.
References in periodicals archive ?
Quick-setting, non-shrink grout was selected for shear connector blockouts and haunches, while Silikal polymer concrete (Sika Corporation, Lyndhurst, New Jersey) was specified for the joints between the precast panels.
Experimental study of a composite wood concrete beam with the INSA-Hilti new flexible shear connector, Construction and Building Materials 13(7): 371-382.
Series Specimen Steel beam cross section PS PS-NB RH 150 x 75 x 5 x 7 PS-SC RH 150 x 75 x 5 x 7 PS-MS RH 150 x 75 x 5 x 7 PS-HS RH 150 x 75 x 5 x 7 PW PW-NB RH 150 x 75 x 5 x 7 PW-SC RH 150 x 75 x 5 x 7 PW-MS RH 150 x 75 x 5 x 7 PW-HS RH 150 x 75 x 5 x 7 Series Connection Composite action device (b) type (a) PS SBC -- SBC Shear connector SBC Midspan stiffener SBC Plastic hinge zone stiffener PW WBC -- WBC Shear connector WBC Midspan stiffener WBC Plastic hinge zone stiffener (a) Details of beam-to-column connection are shown in Figures 5-7.
Caption: FIGURE 4: Details of the headed stud shear connector.
Tenders are invited for Supplying, fabricating, fitting, fixing of stud shear connector as per approved rdso drawing and specification no.
The unknown distribution of the aforementioned integrated tractions is established by applying continuity conditions in all directions at the two interface lines taking into account their relationship with the interface slip through the shear connector stiffness.
Tenders are invited for Stud Shear Connector Welding Machine, Capacity Stud Range-3/16 Inch To Stud Shear Connector Welding Machine, Capacity Stud Range-3/16 Inch To 1 Inch 5Mm-25Mm Specification-Nelweld Model-6000 With 03 Sets Of Gun Attachements For Welding Of 25Mm,22Mm And 19Mm Stud Shear Connector O1 Set Consisting Of Ferrule Holder Plus Check Plus Foot Extension, 01 Piece Each Or Similar
Tenders are invited for Stud Shear Connector Welding Machine, Capacity Stud Range-3/16 Inch To 1 Inch 5Mm-25Mm Specification-Nelweld Model-6000 With 03 Sets Of Gun Attachements For Welding Of 25Mm,22Mm And 19Mm Stud Shear Connector O1 Set Consisting Of Ferrule Holder Check Foot Extension, 01 Piece Each Or Similar
A review in 2009 of the current and future market demand quickly lead to the decision to develop a new shear connector for integrated floor beams, the CoSFB-BetondE-bel.
This composite beam was conceived considering the fact that the top flange of the steel girder might be superfluous when the composite beam is formed by composing a UHPC slab with the steel girder considering the high stiffness developed by the UHPC slab and that the shear connector can fulfill the role of the top flange of the steel girder.
It shows that the shear connector takes loads after delamination of CFRP.