sheet plastic

sheet plastic

[′shēt ‚plas·tik]
(materials)
Flat sections of extruded, molded, or cast plastic, with a thickness greater than that for film, that is, greater than 0.05 inch (1.3 millimeters).
References in periodicals archive ?
As a frost buffer for the plants inside, we built a wooden framework on top of the cold frame and then covered it with sheet plastic. The framework's front is 12 inches tall, angling up to 18 inches tall in the back.
The buildings were lined with black sheet plastic and were being used to process and cut hand-rolling tobacco, without the farmer's knowledge.
But it took until 3am on Friday for them to have finished blowing up each balloon and placing them into ten rolls of sheet plastic.
Perhaps the greatest sign of the problem is the rapidly-growing Great Pacific Trash Patch, a massive sheet plastic and other debris that circles in a gyre across the ocean.
18 March 2014 - US recreational vehicle (RV) components supplier Drew Industries Inc (NYSE:DW) said it subsidiary Lippert Components Inc had closed the acquisition of local maker of thermoformed sheet plastic products Star Design LLC for USD12.3m (EUR8.8m).
One area commonly neglected is the temperature and humidity of the sheet plastic before it's even loaded on to the line.
avocado to 1/4-inch thickness Discard top sheet plastic wrap Using a
Materials include PP, PE, Nylon 6, ABS TPE and TPU and these are ideal for use in a wide range of applications such as packaging, liquid containers, thin wall extrusion (eg corrugated sheet), bags, bin liners, covers, large containers, bins, bearings, guides, brushes, vacuum forming, moulded enclosures, hoses, tool grips and sheet plastic.
Jutting over this lean-to are three obtrusively ugly lumps of red oxide painted steelwork which have been only partially badly disguised with ill-fitting, waste off-cuts of sheet plastic, leaving most of the steel work exposed to view.
PT Cultech Indonesia is foreign investment (PMA) company operating in sheet plastic industry and paper and carton packaging industry.
It is waterproofed with polyurethane membrane (a rolled-on liquid that dries to a rubber consistency) and then covered with sheet plastic (extra insurance), then covered with one foot of dirt on the roof.
The tubes can be made out of hard plastic, like an eaves trough, or sheet plastic shaped into flat-bottomed tubes with support wires and clips.