shoe molding

base shoe, base shoe molding, floor molding, shoe molding, carpet strip

A molding used next to the floor on interior baseboard.
References in periodicals archive ?
I only cut the casing and the doorjamb--a shoe molding will eventually be installed to hide the gap between the flooring and the base trim.
Self-stick quarter rounds and shoe molding can be used as a decorative element.
Seal baseboards by removing the plastic shoe molding on the bottom and spraying expanding foam sealant into the gap (using a spray wand).
When using wedges, you'll have to remove any shoe molding first.
install new carpet flooring manufacturer; install new vinyl 12" x 12": cool white; stain shoe molding to match baseboard apply two coats of polyurethane finish and install new shoe molding.
If you're just dead-set against pulling off baseboards, consider adding base shoe molding along the bottom of the baseboard after you set the tile.
above the floor and then cover the gap with wood base shoe molding.
Then cover the gap and shims with a base shoe molding stained to match the bookcase.
Start by prying loose the base shoe molding and thresholds or carpet strips at the doorways.
On floors without carpet, finish the baseboard by installing the square base shoe molding along the floor.
You'll also need a circular saw and a jigsaw to cut the flooring, and a miter box to cut the shoe molding.
You'll also need transition strips at doorways and openings into other rooms and wood base shoe molding to cover the edge of the tile along walls and cabinets.