These tools are ideal for side milling
, slotting, and profiling in steel and stainless steel materials.
Polymer80 recommends mounting the fixture vertically in the vise and side milling
with the end mill.
Influence of feed, eccentricity and helix angle on topography obtained in side milling
on the other hand, cutting speed plays a less important role in side milling
, where the chip flow is better .
The Plura HFS-that's as in "high feed side milling
"--end mills are specifically tailored for machining steel and stainless steel-but can even be applied to difficult-to-machine materials like titanium, should the need arise.
As shown in Figure 2, side milling
of planar face with end milling tool is taken as an example.
For example, the milling cutter with edge angle equal to 90[degrees] is generally used for side milling
. Consequently, in this milling case, the ratio of width of cut and the diameter of milling tool allow to define the cutting speed factor for specified workpiece material.
IndustrialCOOP.com spokesman Bryan Roberts said the publication was created to enable companies to explore and compare manufacturers of abrasives, tool holders, taps, dies, bits, threading tools, rotary files and burs as well as slitting saws, side milling
cutters, t-slot cutters, metal cutting saw, shearing and slicing machines as well as allied tools at http://www.worldwideindustrialmarketplace.com/directory/cutting_equipment.html.
Seco offers the Solid in a series for all basic operations in steel, stainless, and cast irons and available in two- three-, and four-fluted cutters for side milling
VariMILL II end mill geometries eliminate chatter and harmonics so well they can slot up to 1XD, and perform side milling
operations up to 0.5D radial and 1.5xD axial, according to the maker.
These rotors have traditionally been milled using a side milling
operation to interpolate the profile using CNC control in a connected series of steps.