The VM3 Series snap-action switch offers a choice of single-pole single-throw
or single-pole double-throw circuit.
* Availability in single-pole single-throw
(Form A), single-pole, double throw (Form C), and multiple lead designs.
Like their larger siblings, reed relays offer three general-purpose contact configurations: normally open single-pole single-throw
(NO SPST); normally closed single-pole single-throw
(NC SPST) and single-pole double-throw (SPDT).
The most commonly used relays are single-pole single-throw
normally open (SPST-NO, Form A) and single-pole double-throw (SPDT, Form C).
With service to 10 amps at 250 VAC, this new mountable power strip is constructed with four IEC 60320 standard Sheet F outlets, one IEC 60320 C14 inlet, and a single-pole single-throw
It is offered as a single-pole single-throw
version with a choice of two actuator heights: standard or raised.
The first device was a single-pole single-throw
(SPST) relay and the second a four-pole single-throw (FPST) relay.
With service to 10A at 250V AC, the mountable power strip is constructed with four IEC 60320 standard Sheet F outlets, one IEC 60320 C14 inlet, and a single-pole single-throw
The IK2 is offered as a single-pole single-throw
version, with a choice of two heights of actuator, standard or raised.