sleeve bearing

sleeve bearing

[′slēv ‚ber·iŋ]
(mechanical engineering)
A machine bearing in which the shaft turns and is lubricated by a sleeve.
References in periodicals archive ?
Tenders are invited for Changing of sleeve bearing and alignment of mg set no.-2 of 24/96 dragline of abocp mine of block-ii area.
Both models also feature dual ball fan bearings, which last up to twice as long as sleeve bearing designs.
It is mounted on axle and supported with sleeve bearing. The largest application of traction motors market lies in transportation especially in diesel locomotive.
The new PSUs are cooled with a 120mm sleeve bearing fan that runs at low speeds during typical loads, keeping the PSU nearly silent during everyday tasks.
You can upgrade from a lower cost sleeve bearing fan motor to a more expensive ball bearing fan motor.
A further decisive property is the design of the ceramic sleeve bearing, whose generous dimensions and material combination (silicon carbide on zirconium oxide) offer the longest possible operating lifetime.
* 3 types of thrust face sleeve bearings, such as a standard sleeve bearing, the Harley[TM] sleeve bearing by Cardinal and the Harley[TM] sleeve bearing with TecSonics[TM] bearing-wear monitoring.
By combining the boring of the sleeve bearing mounting diameter at each end of such hollow shafts, the forced fit assembly, the sleeve bearings and boring to final size of the two bearings, it is possible to complete three separate operations in one 30-second operation.
Rather than simply clamping the bottom end of the strut to the counterweight shaft, you'll have to use a collar lined with a nylon or bronze sleeve bearing so that it can rotate freely as the telescope is moved in declination.
The motor end bracket is designed with extended "fingers" that retain a sintered bronze self-aligning sleeve bearing in a snap-fit pocket.
Tenders are invited for supply of journal bearing with pedestal, upper guide bearing, segment and sleeve bearing
The high duration PA Series has an "FLB" bearing structure that increases the fan life efficiency by 30% compared to the sleeve bearing.