The commercial software supplied by the printer manufacturer was used to determine the slicing method employed.
The only sample in both the 34-layer and 90-layer samples that did not contain the flat defect was normal XY, which supports the slicing method employed by the manufacturer's software was indeed method C.
"Whenever a product is prepared using a cutting or slicing method
, for example fish filleting, there is a potential for contaminants to enter the food chain.
Two methods, an ovendry slicing method
and an X-ray scanning method, were used to examine moisture gradients in wood during the drying of Chinese fir (Cunninghamia lanceolata).
6 this relative error has been plotted for the two considered contrasts and polarizations for both the normal-vector methods and the slicing method
For undulating fibres the error will depend on the relation between the "amplitude" and the "wavelength" of the undulation, varying from small (comparable to straight fibres) for the small-amplitude-large-wavelength case to so large that the error effectively makes the slicing method
unusable for the large-amplitude-short-wavelength case.
Some researchers proposes a direct slicing method
that can provide more exact laser beam paths by slicing a constructive solid geometry (CSG) representation of a part.
They proposed a dynamic slicing method
by marking nodes on a static program dependence graph.
It provides information on the availability of environmentally certified products and various types of veneer specifications in terms of slicing method
, thickness, species, etc.
This is because the integrity of the lead composition is not affected by the sampling procedure wit h the microtome slicing method
. Furthermore, large areas (10 [cm.sup.2]) can be produced from reasonably small lead ingots, Le., 5 cm.
Serial slicing methods
based on diamond-knife cutting are, however, reaching practical limitations in terms of achievable z-resolution and voxel isotropy.
The purpose of this work is to develop a more efficient AutoCAD based direct slicing and adaptive direct slicing methods
to improve the RP process efficiency as well as surface quality by avoiding STL format.