solids content

solids content

1. The percentage of solids in a liquid mix, as in an adhesive.
2. In adhesives, coatings, or sealants, the percentage of non-volatile material.
References in periodicals archive ?
It exhibits exceptional adhesion to ferrous metals and substrates, is fast drying and has short minimum overcoat intervals without compromising the high-volume solids content. This coating provides improved crack and wrinkle resistance even at a high dry film thickness and dries to a smooth finish without the need for sanding.
Request for quotations : purchase of laboratory glassware, air sampling equipment to determine the solids content
A total of twelve bakery biscuits from each bakery were used for analysis of physical characteristics like average weight (g) and average diameter (cm) chemical characteristics like pH values, moisture content (%), fat content (%), protein content (%), carbohydrate content (%), ash content (%) and Total solids content (%) were determined by AOCC methods and sensorial attributes likes color, flavor, taste, texture was rated at hedonic scale of 10 while for crispness and overall acceptability, it was 20 and 40 respectively as described by Amerine et al.(1965).
Instead, solid-state anaerobic digestion (SS-AD), which operates at a total solids content greater than 20%, is more suitable for solid organic wastes.
For the producers of fruit beverages with solids content like pulp or fruit chunks, a new affordable option is now available for aseptic handling of solids.
Increasingly, textile companies are requesting resins with non-solvent formulations that offer high-performance properties and high solids content to replace traditional solvent-based systems.
Soluble Solids Content: Results of the descriptive statistics and Duncan test for soluble solids content are illustrated in Table 5.
The resulting MFA solution (312 g) contained 5 wt% total solids content with the melamine/formaldehyde/acrylamide molar ratio of 1:6:3.
The 2000 Model G2 Progressing Cavity Pump features an open throat hopper design with an auger for positive product feed when handling semidry or high solids content sludges.
Penacolite Resin 1-868-D is a dispersion of a resorcinol-blocked methylene diisocyanate in water having a solids content of 40%.
Benefitting from a free cross-section, which prevents any disturbance of the product flow, the probes are ideal for highly viscous products and suspensions with high solids content. Also extremely resistant to acid and pressure, the ring-shaped probe is self-cleaning and very low on maintenance.