specific gravity(redirected from sp. gr)
Also found in: Dictionary, Thesaurus, Medical.
specific gravity,ratio of the weight of a given volume of a substance to the weight of an equal volume of some reference substance, or, equivalently, the ratio of the masses of equal volumes of the two substances.
Relationship Between Specific Gravity and Density
ratio of the mass of a substance to its volume, expressed, for example, in units of grams per cubic centimeter or pounds per cubic foot. The density of a pure substance varies little from sample to sample and is often considered a characteristic property of the
..... Click the link for more information. , which has units of mass per volume, specific gravity is a pure number, i.e., it has no associated unit of measure. If the densities of the substance of interest and the reference substance are known in the same units (e.g., both in g/cm3 or lb/ft3), then the specific gravity of the substance is equal to its density divided by that of the reference substance. Similarly, if the specific gravity of a substance is known and the density of the reference substance is known in some particular units, then the density of the substance of interest, in those units, is equal to the product of its specific gravity and the density of the reference substance.
The most widely used reference substance for determining the specific gravities of solids and liquids is water. Because the density of water is very nearly 1 g/cm3, the density of any substance in g/cm3 is nearly the same numerically as its specific gravity relative to water. In the English system of units the density of water is about 62.4 lb/ft3, so the near equality between specific gravity and density is not preserved in this system. Specific gravities of gases are often given with dry air as the reference substance. Because the densities of all substances vary with temperature and pressure, the temperature and (particularly for gases) the pressure for both the reference substance and the substance of interest are often included when precise values of specific gravities are given.
Methods of Determining Specific Gravity
A number of experimental methods for determining the specific gravities of solids, liquids, and gases have been devised. A solid is weighed first in air, then while immersed in water; the difference in the two weights, according to Archimedes' principleArchimedes' principle,
principle that states that a body immersed in a fluid is buoyed up by a force equal to the weight of the displaced fluid. The principle applies to both floating and submerged bodies and to all fluids, i.e., liquids and gases.
..... Click the link for more information. , is the weight of the water displaced by the volume of the solid. If the solid is less dense than water, some means must be adopted to fully submerge it, e.g., a system of pulleys or a sinker of known mass and volume. The specific gravity of the solid is the ratio of its weight in air to the difference between its weight in air and its weight immersed in water.
Two methods are commonly used for determining the specific gravities of liquids. One method uses the hydrometerhydrometer
, device used to determine directly the specific gravity of a liquid. It usually consists of a thin glass tube closed at both ends, with one end enlarged into a bulb that contains fine lead shot or mercury to cause the instrument to float upright in a liquid.
..... Click the link for more information. , an instrument that gives a specific gravity reading directly. A second method, called the bottle method, uses a "specific-gravity bottle," i.e., a flask made to hold a known volume of liquid at a specified temperature (usually 20°C;). The bottle is weighed, filled with the liquid whose specific gravity is to be found, and weighed again. The difference in weights is divided by the weight of an equal volume of water to give the specific gravity of the liquid. For gases a method essentially the same as the bottle method for liquids is used. Specific gravities of gases are usually converted mathematically to their value at standard temperature and pressure (see STPSTP
or standard temperature and pressure,
standard conditions for measurement of the properties of matter. The standard temperature is the freezing point of pure water, 0°C; or 273.15°K;.
..... Click the link for more information. ).
The specific gravity of a material is defined as the ratio of its density to the density of some standard material, such as water at a specified temperature, for example, 60°F (15°C), or (for gases) air at standard conditions of temperature and pressure. Specific gravity is a convenient concept because it is usually easier to measure than density, and its value is the same in all systems of units. See Density