spacer block

spacer block

[′spās·ər ‚bläk]
(engineering)
References in periodicals archive ?
To hold the ends of the lower chord in place, cut two dummy spacers equal to the width of a spacer block plus two laminae; place them between the lower chord and the outer stops at A and E to hold the chord in place while installing spacers and gluing the top chord.
And the best way to make this happen begins by cutting a temporary wooden spacer block that's 1 inch thick.
The bar is assembled from spacer block modules in Teflon, with liquid and air passages built-in.
Options with these drill rig stands include a vacuum pump, switch box assembly and spacer block.
Depending on the configuration of your telescope and tripod head, you may need to add a spacer block to shift the scope's position lower so that it coincides with the head's altitude pivot, as shown in the photograph below.
Inspection found the cables in various conditions ranging from good in areas where the cables were out of the splash zone to poor where the galvanizing was deteriorating at anchor and spacer block locations, resulting in section loss to the cables.
MSU researchers developed a plastic spacer block that fits between panels, and in theory, eliminates most of the cardboard material now used.
from the surface, use an antenna with a dielectrically coupled spacer block.
At the one exposed corner, the tapered top is nailed to a 2-by-4 spacer block mounted to the side of the post.
Contract notice: Supply of steel guardrail enclosure fenders, poles, bolts and spacer block.