split barrel

[′split ′bar·əl]

(design engineering)

A core barrel that is split lengthwise so that it can be taken apart and the sample removed.

Mentioned in ?

split-barrel sampler

References in periodicals archive ?

He spent a great deal of time on bore obstructions and found that one located near the muzzle usually resulted in no more damage than a split barrel, but an obstruction back near the action would destroy the action and the barrel.

Worst-case scenario

The Testing Laboratory shall furnish all equipment and personnel and perform geotechnical engineering and materials testing services required for design and construction of street, drainage and utility improvements in the City of New Orleans including rotary core drilling , split barrel sampling.

Geotechnical Engineering and Material Testing Services Poo;

Standard test method for standard penetration test (SPT) and split barrel sampling of soils.

Determination of soil properties from standard penetration test complemented by torque measurement (SPT-T)/Determinacao das propriedades do solo atraves do ensaio SPT-T

The second gun was a Webley Mk VI that came in with a bulged and split barrel.

Customer service: first, last, and always: the profitability of your business hinges as much on how you treat your customer as on how good a gunsmith you are

There is the military rifle with a split barrel and disintegrated woodwork wrecked after the gun was fired with a small portion of cleaning cloth lodged in the barrel.

Archive: Gunning for proof of a firearm's worth; Ross Reyburn discovers explosive work being carried out in the Birmingham Gun Barrel Proof House

The USALAB 16 mm twin-screw compounding system features a horizontally split barrel with up to a 40:1 L/D.

Compounding System: touch-screen control

The rubber layers were charged into the split barrel system and were partially extruded, the remaining material in the barrel then being vulcanized, removed from the barrel, sectioned, and the flow patterns investigated.

Rheological behavior and flow visualization in the barrel

It has a split barrel, segmented screws, and 20:1 or 30:1 L/D.

Compounding & mixing

Heed their warning or the result can be a split barrel.

CAST BULLETS FOR SEMI-AUTOS

In this work the rheometer was equipped with a split barrel system (2), the die plate being bolted to the bottom of the barrel.

Flow patterns and entrance velocity profiles in the die

Both the extrusion die and calibration unit have horizontally split barrels and quick release clamps give access to channels and process contact surfaces for cleaning or configuration changes.