spring clip

spring clip

[′spriŋ ‚klip]
(design engineering)
A U-shaped fastener used to attach a leaf spring to the axle of a vehicle.
A clip that grips an inserted part under spring pressure; used for electrical connections.

resilient clip

In sound-insulating construction, a flexible metal device for attaching gypsum board or metal lath to studs or joists to reduce transmission of noise and vibration.
References in periodicals archive ?
TOPS delivers the El Chete with a black Kydex sheath with spring clip or dangler belt carry options.
Easy to conceal, the Honey Badger comes with a black spring clip Kydex belt sheath with screw construction for adaptability.
To hold the sear spring in place, Colt sends out a 380 Auto improvement kit, which includes a spring clip and instructions for attaching the clip to the sear spring.
com)-- Elesa's new series CQ and CSL series IP65 latches incorporate an ingenious quick assembly spring clip mechanism which accommodates door panel thicknesses from 1mm to 2mm with a simple insert and press fitting process - no lock nuts are required as the saw tooth springs take up the recessing adjustment and lock the unit in place.
Spray a 20cm spring clip cake tin with low calorie cooking spray and line with baking parchment.
Once set up and our distances were locked in, we shot a bare shaft through paper only (no mesh at this point) to verify correct arrow flight for each of the four types of mechanical broadheads tested--over-the-top, rubber band retention; over-the-top, spring clip retention; rear-deploying, rubber band retention; and rear-deploying, spring clip retention.
Maintenance is also extremely efficient as installation and removal is very straightforward, without the need for any special tools, requiring only one connecting pin and spring clip to be inserted or removed.
Next, slide the pedestal base and column over the rod and secure the piston rod with the washer and spring clip.
The spring clip opens far enough for a wire to be inserted, but the opening is limited by a stop between the clip and the bracket body Twin-Lock (1998) Ormco/"A" TwinLock[TM] * System is the James Wildman [22] Company happy merging of three components: My locking mechanism, True rigid-walled convertible tube with in- front-of the--archwire locking mechanism Ormco's twin-bracket design requirements and Charles Burstone's [23] variable Damon SL (1996): Dr.
52s were finished with a gray phosphate finish and dark brown plastic grips that are held in place by a large spring clip.