standard tolerance

standard tolerance

An established tolerance for a particular class of product.
References in periodicals archive ?
The cone feature provides a very efficient low PIM signal transmission point when coupled with other WaveWay connectors and provides the benefit of a compatible touch-fit legacy connection to all leading manufacturers' 7/16 connectors, irrespective of deviation from mean standard tolerance.
Tenders are invited for Steel Wire Rope Galvanised Construction 6X36 Rhol Having Tensil Strength As 180 Kgf/Mm Square 1770 N/Mm Square, Dia 13Mm, Material Shell Be Tested For Bracking Force, Lubrication Test, Measured Breaking Force, Tested As Per Standard Tolerance With Test Certificate, Make-Umlindia Or Equivalent.
The tolerance of a pulled steel pin varies with its diameter, with a 0.032" pin having a tolerance of 0.0005", while a larger pin diameter 0.320" would have a standard tolerance of +/-0.0025", a five times greater variation.
For parts up to 150mm the standard tolerance is [+ or -]0.3mm, while the tolerance on larger parts is [+ or -]0.05mm per 25mm.
The RTD option utilizes a 0.1% DIN standard tolerance 100 Ohm platinum RTD and is available on both voltage or current output pressure sensors This $150 option can be added to nearly all Sensotec pressure models, regardless of range, including miniatures.
Up to five pieces of polychloroprene (0.6 mm thickness) were plied, taking the thickness of the sample into the standard tolerance region (and slightly beyond).
is now the standard tolerance for Northbend and some customers demand |+ or -~0.002 in., Ziegler said.
The rules in standard tolerance applications for plastic part desin are commonly stretched or even broke without significant sacrifice of end-use performance.
Tenders are invited for Supply of Ungalvanized Steel Wire Rope Of Construction 6 X 36 Rhol Having Tensile Strength As 180 Kgf/Mm Square 1770 N/Mm Square Of Dia-16 Mm/149 Kn Material Shall Be Tested For Breaking Force, Lubrication Test, Measured Breaking Force, Tested As Per Standard Tolerance With Test Certificate Wire Rope Make- Uml India, Bharat Wire Rope.
* A standard tolerance to [+ or -]10 percent with a maximum input voltage of 350 VAC and a dielectric strength of 1,500 VAC.
Power ratings are from 0.125W to 3W; resistance range is from 10[ohm] to 1 M[ohm]; and standard tolerance is to [+ or -]1 percent.
Standard tolerance is to [+ or -] 10%, with a maximum input voltage of 350 VAC and a dielectric strength of 1,500 VAC.

Full browser ?