# static characteristic

## static characteristic

(electronics)
A relation between a pair of variables, such as electrode voltage and electrode current, with all other operating voltages for an electron tube, transistor, or other amplifying device maintained constant.
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.
References in periodicals archive ?
The basis of the algorithm is the calculation of the steady state mode of operation of the IM for a given slip s, which is described by the system of algebraic equations (1), and the static characteristic is calculated as a set of steady state modes.
It should be noted that the Figure shows the perspective view of the static characteristic. It is obtained by averaging the values of a sequence of several experiments.
However, if the static characteristic of the fan is the only one available, certain questions arise upon design and testing fan systems.
The traction force versus linear position static characteristic has been determined.
more wind power is generated than predicted, power plant deregulates its generation down to the minimum load [P.sup.-.sub.Tk]; Deregulation of power plant in these calculations is done according to static characteristic. It is assumed that a fast drop in forecast error (predicted and actually generated power are equal or close to each other) does not need covering, and power plant is operating in continuous mode at minimum load.
The basic strategy of smoke-pixel judgment is composed of two decision functions: a chromaticity-based decision function in static characteristic and a diffusion-based decision function in dynamic characteristic.
in a perpetual state of active reorganization and cannot properly be regarded as maintaining an inborn deficit as a static characteristic."
Investigation of the influence of the active resistance in the circuit of the excitation winding on the electromagnetic torque can be made on the basis of the calculation of the static characteristic, which is obtained [2] by calculating the sequence of stable asynchronous modes, which are calculated for different values of sliding.
To obtain the multidimensional static characteristic as the dependence of the nodal values of the coordinates of the mode of operation of the SSM on C, the system of DE (4) must be integrated by the numerical method [3, 8].
Nonlinearity of the actuator is given by static characteristic of the actuator and describes dependence of actuator arm position on muscles pressures.
The [f.sub.stat] is an approximation of a static characteristic of modeled system.

Site: Follow: Share:
Open / Close