steam cure

steam cure

[′stēm ‚kyu̇r]
(engineering)
To cure concrete or mortar in water vapor at an elevated temperature, at either atmospheric or high pressure.
References in periodicals archive ?
American Logiball's Sleeve Installers are ideal for point repair systems; whether it consists of installing cured-in-place (ambient, hot water or steam cure) or mechanical locking sleeves.
In addition to felt liners, Applied Felts offers a full array of standard liners and accessories for pipes ranging from 3 to 120 inches in diameter, such as: AquaCure, for the hot water cure inversion method; AquaCure PI, for the hot water cure pull-in method; ColHose PI, used to inflate AquaCure PI during curling to form a permanent composite; AmbiCure, PVC coated for the ambient cure inversion method; and SteamCure PI, for pull in methods steam cure systems.
Nu Main will be a Pull-in-Place, steam cure system for 8” to 12” in diameter main.
The option to steam cure in just 45 minutes also provides significant time and cost savings.
"However, the process of curing UV CIPP liner is totally different than for a water or steam cure inverted CIPP.
Hallett said due to the sensitive eco system, the department would not allow CIPP hot water or steam cure liners to be used.
The Sleeve Installers are the choice of most contractors for their point repair systems; whether it consists of installing cured-in-place (ambient, hot water or steam cure) or mechanical locking sleeves.
The inversion and steam cure process ensures a consistent, quality installed liner that is compliant with ASTM F2561 and F1216.
Insituform Canada will rehabilitate approximately 11 miles of egg-shaped brick pipelines and 10-inch to 42-inch diameter combined sewer system pipelines using its air inversion steam cure installation method, which reduces energy usage during installation by approximately 95 percent.
It is expected that Insituform's proprietary air inversion steam cure installation method will be used throughout the project.