step block

step block

[′step ‚bläk]
(engineering)
A metal block, usually of steel or cast iron, with integral stepped sections to allow application of clamps when securing a workpiece to a machine tool table.
References in periodicals archive ?
The Machinist's Step Block has eleven different height steps and is made by Jergens Machine Tool (jergensinc.com).
Step block castings of intercritically austempered ductile iron (IADI) were produced with thicknesses of 0.6 in.
The zero stability of the new one step block method (12) is determined as the limit h tends to zero.
The Pm Step Block is programmed to apply a sudden increase of mechanical power from -48,9 kW to -60 kW at time t = 0,1 s.
Then divide that measurement by the height of the step block you intend to use (ours was 6 in.).
Participants work at their own pace and, if they are capable, they do a few minutes on an exercise bike, bounce a ball, shoot hoops, lift light weights and use a step block to build strength.
"Create a three-view, orthographic drawing of a step block and dimension it."
Tenders are invited for Sb10 Step Block 10 Steps 1 To 10Mm Nickel Plated, For Calibration Of Ultrasonic Testing Machine Model Digiscan Ds-322.
Mehrkanoon, "A direct variable step block multistep method for solving general third-order ODEs," Numerical Algorithms, vol.
HAPs/ Process Conditions tons of metal) Average surface area green sand parts with seacoal as the only carbonaceous additive 0.213 Very high surface area green sand parts with seacoal as the only carbonaceous additive; allow for thin cross sections 0.378 CERP Test Number, Publication/Revision Process Conditions Date and Process Description Average surface area green 1256-1311 DQ, 4/26/2001--Green sand parts with seacoal as sand test using only seacoal the only carbonaceous at 5% LOI and sodium silicate additive (inorganic) step block cores.
Tenders are invited for Sb-10 Step Block, 10 Steps - 1 To 10 Mm Nickel Plated For Ultrasonic Testing Machine.
Recommendation: Using instrumented wax injection trials with a step block mold, recent research evaluated the restraint of geometrical features by the metal die and process parameters such as dwell time, platen temperature, injection pressure and injection temperature.