street elbow


Also found in: Wikipedia.

street elbow

[′strēt ‚el·bō]
(design engineering)
A pipe elbow with an internal thread at one end and an external thread at the other.
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.

street elbow

street elbow
Same as service ell.
McGraw-Hill Dictionary of Architecture and Construction. Copyright © 2003 by McGraw-Hill Companies, Inc.
References in periodicals archive ?
One of the plumbing supplies that I was packing up was a three-inch PVC street elbow. (A street elbow is different than a regular elbow, one side is smaller--same size as a pipe--and the other side is a fitting for a pipe to go into.) I had a hole saw that was very close to the size of the small side of the street elbow.
With the barrel standing up, I placed the wood on the ground with the big end of the street elbow on the wood.
HOW TO BUILD AN AUTOMATIC CHICKEN FEEDER
* 1/4-18 NPT street elbow and intake filter assembly.
Epoxy-coated wetted parts
Typically the polar axis is fixed at the angle of a street elbow, usually 45[degrees].
The Delmarva pipe mount: this update of a classic design combines smooth performance and stability
street elbow (male threads at one end, female at the other) into the range gas port.
Sure steps to leak-free gas lines
To the bracket's side I attached a 3/4-inch floor flange, which fits on the male end of a 90 [degrees] street elbow. This elbow was then tightly screwed to an 8-inch-long pipe section.
Pipe mount and storage rack for a C90
Encyclopedia browser ?
Full browser ?