suspended load


Also found in: Wikipedia.

suspended load

[sə′spen·dəd ′lōd]
(geology)
The part of the stream load that is carried for a long time in suspension. Also known as suspension load.
References in periodicals archive ?
Verton has developed a remote rotating device that uses gyroscopic modules to rotate a suspended load. A new concept has been developed in which this unit is integrated into a lifting yoke for installing wind turbine blades.
PSC TRT[TM] Tagline Retriever Tool - Tool designed to safely retrieve taglines without a load handler having to go too close to a suspended load.
MGT Teesside confirmed the safety incident involved a boiler where a suspended load unexpectedly moved during installation.
Moreover, the suspended load by a rope adds unactuated degrees of freedom to the system, increasing its underactuation degree.
Further, in an effort to increase production, the mine was intending to increase the suspended load and was concerned about further exacerbating the problems in this area.
The total sediment load has been estimated by adding 10% bed load in the computed suspended load. This value was originally proposed by Kirmani based on early sediment data and was adopted and confirmed in all subsequent studies.
A Wisconsin company violated [section]56.16009, which states, "persons shall stay clear of suspended loads," when a miner did not stay clear of a suspended load during a crane assembly project.
Pollution load based on average values and flow rate (155.5m3/day) shows that an average industry produces 174.2 Kg of suspended load daily.
Therefore, canceling or reducing oscillation of the suspended load is very necessary since oscillations of load in an industrial environment and other areas can result in damage [18-22].
The model includes the mass of the cart M, the mass of the suspended load m, swing angle [theta], gravitational acceleration g, horizontal distance a from the cart's initial position to the origin, and
Subpart CC applies to power-operated equipment, when used in construction, which can hoist, lower and horizontally move a suspended load.
For comparing the evaluated sediment by the exprimental model of the sedimentary station in the outer part of the basin, the suspended load and bed load were used.