synthetic rubber

Also found in: Dictionary, Thesaurus, Medical, Acronyms, Wikipedia.

synthetic rubber:

see rubberrubber,
any solid substance that upon vulcanization becomes elastic; the term includes natural rubber (caoutchouc) and synthetic rubber. The term elastomer is sometimes used to designate synthetic rubber only and is sometimes extended to include caoutchouc as well.
..... Click the link for more information.

Rubber, Synthetic


synthetic polymers that, like natural rubber, can be converted to vulcanized rubber.

All synthetic rubbers are usually classified as general-purpose or special-purpose (see Table 1). General-purpose rubbers are used in the production of articles in which the basic property of vulcanized rubbers—that is, high elasticity at ordinary temperatures—is desirable (for example, tires, conveyer belts, and footwear). Special-purpose rubbers are used in producing articles that should be resistant to the action of solvents, oils, oxygen, ozone, heat, and frost—that is, able to retain high-elastic properties over a broad range of temperatures. The classification of synthetic rubbers according to use is to a degree arbitrary, since many rubbers possess a range of properties that make them suitable as both general-purpose and special-purpose material. On the other hand, special demands are sometimes placed on certain general-purpose articles, such as in the production of frost-resistant tires and oil-resistant and gasoline-resistant rubber footwear. Polymers called thermoelastic plastics have been developed that combine the properties of elastomers and thermoplastic polymers and that therefore can be processed into rubber articles while bypassing the vulcanization stage. The special groups of synthetic rubber include aqueous dispersions of rubber (latexes), liquid rubbers (oligomers, which harden with the formation of rubberlike materials), and filled rubbers (mixtures of synthetic rubbers with fillers and plasticizers and produced in the manufacture of synthetic rubbers).

The most widely used methods of producing synthetic rubbers are emulsion and stereospecific polymerization. Polymerization makes it possible to regulate the molecular weight of the rubbers. In processing the synthetic rubbers polymerization makes it possible to do without the energy-intensive stage of mastication. The production processes (in the majority of instances these are continuous) also include the stages of separating the rubber from the dispersions or solutions (for example, by coagulation or sedimentation), removing the residues of catalysts, emulsifiers, and other impurities from the rubber, drying, briquetting, and packaging. The most important monomers in the synthesis of rubbers —butadiene, isoprene, and styrene—are obtained primarily from casinghead-gas by-products and cracking gases. For example, butadiene can be obtained by the catalytic dehydrogenation of //-butane. In addition to these monomers, acrylonitrile, fluoro-olefins, and certain silicone compounds can also be used.

The successful solution to the problem of the industrial synthesis of rubber is among the most important scientific and technical achievements of the 20th century. Rubber was synthesized for the first time in the world on a large industrial scale in the USSR in 1932, using a method developed by S. V. Lebedev— that is, the polymerization with metallic sodium of 1, 3-butadiene obtained from ethyl alcohol to produce SKB sodium-butadiene rubber. The industrial production of butadiene-styrene rubbers was organized in Germany in 1938, and the large-scale production of synthetic rubbers was started in the United States in 1942. By 1972 more than 20 countries were producing synthetic rubbers. The USSR holds one of the leading places in terms of the production volume of synthetic rubbers.

World production of synthetic rubbers is growing rapidly. Whereas in 1950 synthetic rubbers constituted about 22 percent of the total production volume of all rubber in the capitalist

Table 1. Major industrial synthetic rubbers
Name of rubbers and their Soviet abbreviationsChemical compositionSpecial properties
General-purpose rubbers
Butadiene, SKD..........Cis-1, 4-polybutadiene
Styrene-butadiene (a-methyl-styrene), SKS (SKMS).....Copolymers of butadiene and styrene (α-methylstyrene)
Isoprene, SKI...........Cis-1, 4-polyisoprene
Ethylene-propylene, SKEP.............Table 1. Major industrial synthetic rubbers
Butyle rubber, BK..........Copolymers of isobutylene and small quantities of isopreneImpermeability to gases, weather resistance
Chloroprene (Nairit)..........PolychloropreneSatisfactory oil resistance and gasoline resistance
Special-purpose rubbers
Butadiene nitrile, SKN.......Copolymers of butadiene and acrylonitrileOil resistance, gasoline resistance
Polysulfide (Thiokol)........PolysulfidesOil resistance, gasoline resistance
Silicone, SKT...........Polyorganic siloxanesHeat and frost resistance, high electric-isolating properties, physiological inertness
Fluorine-containing rubbers, SKFCopolymers fluoro-olefinsHeat, oil, weather, and fire resistance, resistance to attack by aggressive media
Urethane, SKU..........PolyurethanesGreat strength in stretching and wear
Chlorosulfonated polyethylene KhSPE.............Polyethylene containing Chlorosulfonated groupsWeather resistance, heat resistance, durability

countries, in 1960 the figure was approximately 48 percent, and by 1973 it had risen to approximately 63 percent (that is, about 5.9 million tons of synthetic rubber and about 3.5 million tons of natural rubber). The intensive growth in the output of synthetic rubbers is explained by the significantly lower prime cost of production of the most widely used general-purpose rubbers (in particular, butadiene-styrene) in comparison to the prime cost of production of natural rubber, as well as by the impossibility of using natural rubber in certain special-purpose articles, such as heat, oil, and gasoline resistant items. The development of butadiene and isoprene stereoregular synthetic rubbers has also led to a relative decline in the demand for natural rubber, since the former are competitive with natural rubber in the production of certain tires (for example, for passenger cars).

There are around 50, 000 listed processed-rubber products manufactured from synthetic rubbers. The largest consumer of synthetic rubbers is the tire industry, which accounts for more than 50 percent of the total volume of synthetic rubbers consumed. Technical progress in various areas of industry has confronted the synthetic rubber industry with the task of developing rubbers that will combine high heat resistance, resistance to ionizing radiation, and oil and gasoline resistance. This problem in particular can be solved by synthesizing rubbers from monomers that contain inorganic elements, such as boron, phosphorus, nitrogen, fluorine, and silicon.


Whitby, G. S. [ed.]. Sinteticheskii kauchuk. Moscow-Leningrad, 1957. (Translated from English.)
Litvin, O. B. Osnovy tekhnologii sinteza kauchukov. Moscow, 1972.
Zhurnal Vsesoiuznogo khimicheskogo ob-va im. D. I. Mendeleeva, 1968, vol. 13, no. 1. (Issue devoted to the rubber industry.)
Kirpichnikov, P. A., L. A. Averko-Antonovich, and Iu. A. Averko-Antonovich. Khimiia i tekhnologiia sinteticheskogo kauchuka. Leningrad, 1970.
Dogadkin, B. A. Khimiia elastomerov. Moscow, 1972.
Spravochnik rezinshchika: Materialy rezinovogo proizvodstva. Moscow, 1971.

synthetic rubber

[sin′thed·ik ′rəb·ər]
Synthetic products whose properties are similar to those of natural rubber, including elasticity and ability to be vulcanized; usually produced by the polymerization or copolymerization of petroleum-derived olefinic or other unsaturated compounds.

synthetic rubber

An elastomer manufactured by a chemical process, as distinguished from natural rubber obtained from trees; rubberlike with respect to its degree of elasticity.
References in periodicals archive ?
The global market for synthetic rubber has been segmented on the basis of end-use industry, type, and region.
In addition to their technical knowledge of synthetic rubber, the authors draw heavily on unpublished government histories by Brendan J.
- Plastic in Primary Forms and Synthetic Rubber in Japan: Industrial Report
Being petroleum derived, synthetic rubber experiences similar price volatility as its raw materials like naphtha, ethylene and benzene.
Since mid-August 2011, the quoting prices for synthetic rubber have been on the wane with a 20%-30% decline.
Imports of synthetic rubber are dominated by the type of SBR.
Several types of specialty synthetic rubbers include Nipol nitrile rubber (NBR), Zetpol hydrogenated nitrile rubber (HNBR), Hytemp polyacrylate (ACM), Hydrin epichlorohydrin (ECO) and Parel propylene oxide polymer (PO).
S&P Global Platts reports that the synthetic rubber and tire markets are being pulled into the U.S.-China trade war, with China set to enforce a 10% tariff" on various synthetic rubber and tire products originating in the U.S.
Taipei, June 30, 2011 (CENS) -- Driven by the promising Indian tire market, China Synthetic Rubber Corp.
Houston, TX, June 29, 2011 --( The Plaza Group, a leading international petrochemical marketing company, will join the International Institute of Synthetic Rubber Producers, Inc.
The other elastomer, EPDM XG 006, is reportedly the first pelletized, oil extended synthetic rubber, and is intended for use in TPOs requiring low stiffness and high flow.