tackifier


Also found in: Dictionary, Wikipedia.

tackifier

[′tak·ə‚fī·ər]
(materials)
A type of resinous material added to an elastomer to produce adhesives that will adhere on contact.
Mentioned in ?
References in periodicals archive ?
Progression of site preparation: (a) spring vegetation kill, (b) topsoil placement, (c) after compaction and scarifying, (d) hydraulic mulch and straw application, (e) added tackifier (dashed line denotes the upslope location)
In this work, the role of tackifier is not directly focused on its main tackifying function, but on the side effect relating to mechanical properties and dynamic characteristics, since these properties determine the performance rubber products.
Silicone and acrylic PSAs do not require a tackifier. More costly silicone-based adhesives may be found in adhesive formulations of tapes that are geared for hightemperature applications and chemical resistance.
Products: Soiloc-MQ dust suppressant, Soiloc-Sod Crystals soil amendment, Soiloc-BR manure treatment chemical, Soiloc-H feed grade dust suppressant, Mulchtack41 mulch tackifier
This process, which requires special equipment, mixes mulch with water and a tackifier (sticky substance).
Then, he says, Cypher discovered starch derivatives as a tackifier for hydroseeding applications--mixing mulch, seed, fertilizer, and water into a slurry that is sprayed on the ground.
Dry straw mulch can be dropped from a small helicopter, while straw dropped on steep slopes would require a liquid "tackifier" to hold it in place, hence necessitating a heavier, more costly helicopter to apply it.
Tackifier: A sticky oil based substance used to hold bonded fiber mulches together.
With an RS micro encapsulated "tackifier" backing, they can be installed with a glue-free "peel and stick" method that virtually eliminates emission of toxic volatile organic compounds (TVOCs).
It even investigated the more substantial overlaps in the markets for adhesive tackifier resins, road marking resins and ink resins.
For example, "Dow-UT's advanced RTM features our tackifier technology, which allows you to take dry (untreated) fabric plies and form them into very complex shapes while they're still pliable." The process, he added, enables the resulting shaped carbon-fiber preforms to be assembled into a complex part that approximates a complicated forging.
A range of pre-stretch films is being produced but most interest is anticipated in Accuwrap Star QT, a tough, three-layer, co- extruded film with tackifier applied to one side, a stretch rate of about 300% and an unwind noise level of only 62dB.