Following, commercial and synthesized terpolymer
reduced their viscosity in 90.7% and 5.3%, respectively.
 investigated the electrocaloric effect of the P(VDF-TrFE-CFE) terpolymer
(62.5/29/8.5 mol%) with a blended P(VDF-TrFE) (55/45 mol%) copolymer.
A good choice to overcome these questions is using porous terpolymers
as the supports instead of inorganic and organic materials.
Airflex 728 emulsion, our vinyl acetate-ethylene vinyl chloride terpolymer
, provides excellent alkaline hydrolysis resistance over high pH substrates.
The binder is made of a terpolymer
of acrylonitrile butadiene styrene that has a glass transition temperature between 10[degrees]C and +40[degrees]C.
is an example of chelating resin functionalized with DTO and used for adsorption of Fe(III), Cu(II), Ni(II), Co(II), and Zn(II) ions , polystyrene-divinylbenzene functionalized with DTO has been used for removal of Cu(II), Zn(II), Cd(II), and Pb(II) ions , and DTO groups incorporated into a matrix of polystyrene-divinylbenzene have been used for Pd(II) adsorption , Dithiooxamide-formaldehyde (DTOF) chelating resin has been used for the adsorption of silver metal ion.
Another proposed PC replacement is the Kostrate[R] Edge rubber-modified terpolymer
developed by Plastic Selection Group, Inc.
polyvinylfluoride, chlorotrifluoroethylene homopolymer, tetrafluoroethylene-ethylene copolyrner, vinylidenedifluoride-hexa fluoropropylene-tetrafluoroethylene terpolymer
and other blends.
This article highlights Unimatec Noxtite HT-ACM grade developed for significantly improved fluid resistance in fuels and engine fluids highly contaminated with additives found in blow-by or EGR applications, in comparison with the peroxide curable Noxtite FKM grades, both copolymer (66% F-content) and terpolymer
Run 1 in Table 1 exemplified the typical polymerizing procedure of the terpolymer
. 0.072 g Nd[([P.sub.204]).sub.3] (64.9 pmol) was put in an flask and then, 15 equiv of the alkylation agent (DIBAH) was introduced to form a homogeneous brown solution at room temperature.
This system has been applied to styrene-isoprene-styrene terpolymer
hot-melt adhesive and natural rubber solutions.