In other parts of the country we have seen that
time delay safes, combined with the other security policies and procedures in place at our stores, can greatly reduce these incidents.
Like all elements of the PlayBox Technology Neo product series, Neo TS
Time Delay can be configured for single-unit operation or twinned for use in main and backup modes.
Generator G1 is infinite bus, and there is a
time delay in the loop controlled by G3.
The organization of the paper is as follows: we describe the Myc/E2F/miR-17-92 network with
time delay in Section 2.
(2014) to evaluate the efficacy of constant
time delay to teach highly motivating braille words to young students with multiple disabilities.
Figure 8 has plots of the total
time delay given by (8) across an array of diameter D at a distance R from the transmitter for several values of [theta].
In addition, the choice of the model structure (order and
time delay) and the parameter estimation are two basic elements in the identification problem.
where Sh represents the exit thickness, M is the mill stand stiffness, Q is the plastic stiffness coefficient of the strip, [[tau].sub.2] is the time constant, and d is the
time delay in the monitoring AGC system.
B and [delta] represent the feedback gain and the design
time delay of the controller, respectively.
where [y.sub.i](t) = [([y.sub.i1] (t), [y.sub.i2] (t), ..., [y.sub.in] (t)).sup.T] [member of] [R.sup.n] is state variable of ith node, b [member of] [R.sup.m] is unknown parameter vector, [DELTA][alpha][member of][R.sup.m] is unknown parameter disturbance vector, [d.sub.i](t) is internal disturbance, [tau] is
time delay, [GAMMA] is internal coupled matrix, [GAMMA] = diag([sub.1], [sub.2], ..., [sub.n]) is diagonal matrix and [parallel][GAMMA][parallel] > 0, D = [([d.sub.ij]).sub.NxN] is external coupled matrix, [d.sub.ij] is defined as follows: [d.sub.ij] > 0 if there is a connection between node i and node j, otherwise [d.sub.ij] = [d.sub.ji] = 0, and the diagonal elements [d.sub.ii] is defined as follows
Time delay is a field-adjustable occupancy sensor setting that determines the amount of time between last detected occupancy and the connected lighting load being reduced.