transfer characteristic


Also found in: Dictionary, Wikipedia.

transfer characteristic

[′tranz·fər ‚kar·ik·tə‚ris·tik]
(electronics)
Relation, usually shown by a graph, between the voltage of one electrode and the current to another electrode, with all other electrode voltages being maintained constant.
Function which, multiplied by an input magnitude, will give a resulting output magnitude.
Relation between the illumination on a camera tube and the corresponding output-signal current, under specified conditions of illumination.
References in periodicals archive ?
Many scholars have studied the heat transfer characteristics of energy piles.
Caption: FIGURE 15: Simulated load-settlement curve, unit shaft resistance, and load transfer characteristic of P121.
Both the particle loading and particle shape influence the convective heat transfer characteristic obviously.
The ADC transfer characteristics are shown in Figure 10(a) plotted alongside the characteristics of an ideal ADC.
Transfer Characteristics. Considering the influence of the boundary conditions on the transfer relationship of the periodic strut, three classical boundary conditions are introduced.
7(a), the simulated transfer characteristics for the EDMS are plotted as a function of gap (G).
As long as the delay transfer characteristics are overlapped in the adjacent digital setting, the delay line consisting of several Pseudo-differential delay cell can accept a continuous frequency range for the input reference clock.
It is also noted that the heat transfer rate increases dramatically as thickness decreases, which is understandable through observations of the heat transfer characteristic time, [[Lambda].sub.t].
The study was followed up with an experimental investigation of the moderator cell's heat transfer characteristic [9] and a final report on the operation of the cold neutron source at BRR published in 2002 [10].
The coherent combustion noise CCNL(k) can be calculated by the transfer characteristic H(k) and cylinder pressure level X(k) from equation a-4, and then the A weighted sound pressure level was applied.