Convergence along the boundary causes a local deepening of
water vapor, and the SWD allows identification of this linear feature owing to differential absorption of
water vapor between the 10.3--and 12.3-[micro]m bands.
The PWV is calculated from integration of
water vapor mass through all levels of the sounding in this paper.
where [[rho].sub.v] is
water vapor density, kg/[m.sup.3] (lb/[ft.sup.3]), [D.sub.eff] is effective diffusion coefficient, [m.sup.2]/s ([ft.sup.2]/s), and [S.sub.v] is source or sink of the
water vapor due to moisture phase change.
All the adsorption isotherms of
water vapor on the MFS-02 show a typical type-V profile with an initial unfavorable adsorption isotherms at the at low absolute pressure and pore condensationat low absolute pressure.
This suggests that SF mats with desired secondary structures can be achieved through controlling a single variable of either time or temperature during
water vapor annealing.
So it can be set as an input when using statistical retrieval algorithm to profile the
water vapor density.
If some of those moles are the lighter
water vapor, the air will be less dense.
The absorbent article further comprising: on a first portion of the
water vapor pemeable waterproof sheet, a water content indicator coating layer provided between the
water vapor permeable waterproof sheet and the absorbent element, the water content indicator coating layer comprising a hydrophilic resin coating layer and a layer of an information mark provided on an inner surface of the hydrophilic resin coating layer, and wherein a permeability of the first portion of the
water vapor permeable waterproof sheet and the hydrophilic resin coating layer is lower than a permeability of a second portion of the
water vapor permeable waterproof sheet on which the hydrophilic resin coating layer is not provided on the
water vapor permeable waterproof sheet.
"Our poster shows ALD layers can be grown effectively using
water vapor instead of ozone, which is more expensive, equipment intensive, and hazardous.
Water vapor and its transmission are important for coatings in two quite different ways.
The degree to which
water vapor seeped into the film increased with increases in temperature and relative humidity.