waveguide filter


Also found in: Acronyms.

waveguide filter

[′wāv‚gīd ¦fil·tər]
(electromagnetism)
A filter made up of waveguide components, used to change the amplitude-frequency response characteristic of a waveguide system.
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.
References in periodicals archive ?
Yu, "Coupling topology of substrate integrated waveguide filter using unequal length slots with nonresonating nodes," IEEE Electronics Letters, vol.
Sun, "Miniaturized dual-band substrate integrated waveguide filter with controllable bandwidths" IEEE Microwave and Wireless Components Letters, vol.
Itoh, "Substrate integrated waveguide loaded by complementary split-ring resonators and its applications to miniaturized waveguide filters," IEEE Trans.
TU4A-2: LTCC Wide-band Canonical Ridge Waveguide Filters
Figure 4(a) shows the equivalent circuit for the one-pole waveguide filter loaded with an SRR described in [10], which is composed of a series inductor ([L.sub.s]), a series capacitor ([C.sub.s]), and a parallel inductor ([L.sub.p].
Vardaxoglou, "A 3rd Order Ridge Waveguide Filter with Parallel Coupled Resonators," IEEE MTT-S International Microwave Symposium Digest, Fort Worth, TX, 2004, pp.
Wang, " A novel dual mode substrate integrated waveguide filter with mixed source-load coupling (MSLC)," Progress In Electromagnetics Research, Vol.
A bandpass waveguide filter operating is designed and measured.
Mazur, "Tunable waveguide filter with bowtie metallic posts," IEE Proceedings Microwaves, Antennas and Propagation, Vol.
In this section, we provide a common step by step design for a band pass waveguide filter based on Chebyshev approximation.
Alessandri, "Diplexer design using pre-synthesized waveguide filters with strongly dispersive inverters," 2001 IEEE MTT-S International Microwave Symposium Digest, Vol.
The 2.5 percent bandwidth waveguide filter was designed using this method and the frequency response was measured.